ISO 13990-2:2006 PDF

Textile machinery and accessories — Yarn feeders and yarn control for knitting machines — Part 2: Connecting dimensions for yarn feeders and yarn control devices

Название (английский):

ISO 13990-2:2006

Textile machinery and accessories — Yarn feeders and yarn control for knitting machines — Part 2: Connecting dimensions for yarn feeders and yarn control devices

Статус документа:: Отменён
Формат:: Электронный (PDF)
Количество страниц:: 4
Дата публикации:: 7 февраля 2006 г.
Издание:: ISO IS 13990 edition 1 version 1
ICS:: 59.120.40

Тип поставки:

Full version60 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:60 €

Описание (английский):

ISO 13990-2:2006 specifies the connecting dimensions for the mounting and electrical installation of yarn feeders and yarn control devices, as defined in ISO13990-1, for knitting machines.

Технические детали

Технический комитет: ISO/TC 72/SC 3 - Machinery for fabric manufacturing including preparatory machinery and accessories
SKU: ISO 13990-2:2006

Abstract

Overview - ISO 13990-2:2006 (yarn feeders & yarn control)

ISO 13990-2:2006 is the ISO standard that specifies connecting dimensions for the mounting and electrical installation of yarn feeders and yarn control devices for knitting machines. It complements ISO 13990-1 (vocabulary) and ISO 13990-3 (cable dimensions) and defines the mechanical and electrical interface dimensions to ensure compatibility and interchangeability of yarn-feeding components across textile machinery.

Key topics and technical requirements

Scope: Defines connecting dimensions for yarn feeders and yarn control devices as used on knitting machines (mounting and electrical installation).
Referenced tolerances: Unless stated otherwise, tolerance class c from ISO 2768-1:1989 applies.
Mechanical interface dimensions (examples from Table 1):
- Working width of belt on adjustable pulley (a) = 20 mm
- Distance between centre of working surface and fixed flange (b) = 19 mm
- Total width of adjustable pulley (c) = 45 mm
- Bore diameter of adjustable pulley (d) = 17 H7
- Working width of pulley belt (g) = 13 mm
- Typical feeder-specific distances (h): capstan 75 mm, unrolling 49 mm, combined > 98 mm
- Clamping width of mounting (i) = 20 mm
- Note: dimensions shown in figures (Figures 1–3) and Table 1 are normative; dimensions in brackets should be avoided in new designs.
Electrical / interconnection interfaces (Table 2 examples):
- Width of mounting rod (o) = 25 mm h11
- Height of mounting rod (p) = 3 mm h11
- Distance lower edge to contact surface (q) = 14 ± 0.5 mm
- Distance between contact pin and clip (t) = 9.5 ± 0.5 mm
- Clip opening width (u) = 17 mm
- Contact ribbon clearance (x) = 1.5–3 mm
- Contact area width (z)

Overview - ISO 13990-2:2006 (yarn feeders & yarn control)

Key topics and technical requirements

Scope: Defines connecting dimensions for yarn feeders and yarn control devices as used on knitting machines (mounting and electrical installation).
Referenced tolerances: Unless stated otherwise, tolerance class c from ISO 2768-1:1989 applies.
Mechanical interface dimensions (examples from Table 1):
- Working width of belt on adjustable pulley (a) = 20 mm
- Distance between centre of working surface and fixed flange (b) = 19 mm
- Total width of adjustable pulley (c) = 45 mm
- Bore diameter of adjustable pulley (d) = 17 H7
- Working width of pulley belt (g) = 13 mm
- Typical feeder-specific distances (h): capstan 75 mm, unrolling 49 mm, combined > 98 mm
- Clamping width of mounting (i) = 20 mm
- Note: dimensions shown in figures (Figures 1–3) and Table 1 are normative; dimensions in brackets should be avoided in new designs.
Electrical / interconnection interfaces (Table 2 examples):
- Width of mounting rod (o) = 25 mm h11
- Height of mounting rod (p) = 3 mm h11
- Distance lower edge to contact surface (q) = 14 ± 0.5 mm
- Distance between contact pin and clip (t) = 9.5 ± 0.5 mm
- Clip opening width (u) = 17 mm
- Contact ribbon clearance (x) = 1.5–3 mm
- Contact area width (z)

ISO 13990-2:2006 PDF

Технические детали

Abstract

Overview - ISO 13990-2:2006 (yarn feeders & yarn control)

Key topics and technical requirements

Похожие стандарты

Abstract

Overview - ISO 13990-2:2006 (yarn feeders & yarn control)

Key topics and technical requirements

Похожие стандарты

General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indica…

Textile machinery and accessories. Yarn feeders and yarn control for knitting machines. Vocabulary.

Textile machinery and accessories — Yarn feeders and yarn control for knitting machines — Part 3: Dimensions…