ISO 14960-1:2023 PDF

Tubeless tyres — Valves and components — Part 1: Snap-in tyre valves test methods

Название (английский):

ISO 14960-1:2023

Tubeless tyres — Valves and components — Part 1: Snap-in tyre valves test methods

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 11
Дата публикации:: 8 ноября 2023 г.
Издание:: ISO IS 14960 edition 2 version 1
ICS:: 83.160.01

Тип поставки:

Full version165 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:165 €

Описание (английский):

This document specifies test methods for snap-in tubeless tyre valves intended for, but are not limited to, on-road applications. TPMS valves and high-pressure valves are not included in this document.

Технические детали

Технический комитет: ISO/TC 31/SC 9 - Valves for tube and tubeless tyres
SKU: ISO 14960-1:2023

Abstract

Overview

ISO 14960-1:2023 - "Tubeless tyres - Valves and components - Part 1: Snap-in tyre valves test methods" specifies laboratory test methods and performance requirements for snap-in tubeless tyre valves intended primarily for on‑road applications. The document defines how to prepare, age and test valves (excluding TPMS valves and high‑pressure valves), and provides reproducible procedures to assess sealing, mechanical and environmental resistance.

Key Topics

Scope & definitions
- Applies to snap‑in valves (rigid housing adhered to a resilient body).
- Excludes TPMS and high‑pressure valves.
- Defines "unused" and "aged" valve conditions (ageing example: 100 °C ±3 °C for 4 h, then cooled).
Test fixtures & hole sizes
- Test plate/hole diameters included: 8.8 mm, 11.3 mm and 15.7 mm with specified thickness and edge chamfering.
Primary test methods
- Adhesion: axial cuts and traction to measure bond separation.
- Valve core seal: room temperature, low temperature (–40 °C) and high temperature (100 °C) leak tests with defined pressures; acceptable leakage

Overview

Key Topics

Scope & definitions
- Applies to snap‑in valves (rigid housing adhered to a resilient body).
- Excludes TPMS and high‑pressure valves.
- Defines "unused" and "aged" valve conditions (ageing example: 100 °C ±3 °C for 4 h, then cooled).
Test fixtures & hole sizes
- Test plate/hole diameters included: 8.8 mm, 11.3 mm and 15.7 mm with specified thickness and edge chamfering.
Primary test methods
- Adhesion: axial cuts and traction to measure bond separation.
- Valve core seal: room temperature, low temperature (–40 °C) and high temperature (100 °C) leak tests with defined pressures; acceptable leakage

ISO 14960-1:2023 PDF

Технические детали

Abstract

Overview

Key Topics

Похожие стандарты

Abstract

Overview

Key Topics

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts