ISO 17455:2005 PDF

Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe

Название (английский):

ISO 17455:2005

Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 11 октября 2005 г.
Издание:: ISO IS 17455 edition 1 version 1
ICS:: 23.040.20

Тип поставки:

Full version150 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:150 €

Описание (английский):

ISO 17455:2005 specifies two test methods for determining the oxygen permeability of barrier pipe: the dynamic and the static methods.

Технические детали

Технический комитет: ISO/TC 138/SC 5 - General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications
SKU: ISO 17455:2005

Abstract

Overview

ISO 17455:2005 - "Plastics piping systems - Multilayer pipes - Determination of the oxygen permeability of the barrier pipe" defines laboratory test methods to measure how much oxygen passes through the barrier layer of multilayer plastic pipes. The standard specifies two equivalent test methods - the dynamic (Method I) and static (Method II) - and describes the test principle, required apparatus, sample preparation, measuring procedures and calculation of oxygen flux.

Key topics and technical requirements

Scope and principle: Measurement of oxygen transfer through the test-piece wall in a closed system; the increased oxygen in the system is attributed to permeation through the barrier layer.
Test methods:
- Method I (Dynamic): Continuous water circulation (max 0.5 dm3/min), measure oxygen concentration over time; Stage 2 (approx. 5 h) yields a constant rate for flux calculation.
- Method II (Static): Stagnant water inside the pipe for 6 h, then displaced and total oxygen collected and integrated to determine flux.
Acceptance and repeatability: Use results only when three successive measurements are within 5% of each other during the steady stage.
Test conditions: Test temperatures specified as 40 °C or 80 °C (as required by the product/system standard); use deionized water (pH 7) and oxygen-reduced water (

Overview

Key topics and technical requirements

Scope and principle: Measurement of oxygen transfer through the test-piece wall in a closed system; the increased oxygen in the system is attributed to permeation through the barrier layer.
Test methods:
- Method I (Dynamic): Continuous water circulation (max 0.5 dm3/min), measure oxygen concentration over time; Stage 2 (approx. 5 h) yields a constant rate for flux calculation.
- Method II (Static): Stagnant water inside the pipe for 6 h, then displaced and total oxygen collected and integrated to determine flux.
Acceptance and repeatability: Use results only when three successive measurements are within 5% of each other during the steady stage.
Test conditions: Test temperatures specified as 40 °C or 80 °C (as required by the product/system standard); use deionized water (pH 7) and oxygen-reduced water (

ISO 17455:2005 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts