ISO 17841:2015 PDF

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for thermal fatigue of fine ceramics substrate

Название (английский):

ISO 17841:2015

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for thermal fatigue of fine ceramics substrate

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 15
Дата публикации:: 5 августа 2015 г.
Издание:: ISO IS 17841 edition 1 version 1
ICS:: 81.060.30

Тип поставки:

Full version225 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:225 €

Описание (английский):

ISO 17841:2015 describes the test methods for determining thermal fatigue property of fine ceramic substrates applied to power modules, electronic control unit and similar devices.

Технические детали

Технический комитет: ISO/TC 206 - Fine ceramics
SKU: ISO 17841:2015

Abstract

Overview - ISO 17841:2015 (thermal fatigue test for fine ceramics substrate)

ISO 17841:2015 specifies standardized test methods for determining the thermal fatigue properties of fine ceramic substrates (advanced/technical ceramics) used in power modules, electronic control units (ECUs) and similar devices. The standard defines specimen geometry, thermal cycling regimes, mechanical test methods (four‑point bending), measurement precision and reporting requirements to assess how ceramic substrates and metal‑ceramic assemblies resist repeated temperature changes.

Key technical topics and requirements

Test specimens: Composite specimens consist of a fine ceramic plate with metal plates joined to both faces. Standard ceramic dimensions: length 40.0 mm, width 10.0 ± 0.5 mm. Ceramic thicknesses listed from 0.20 mm to 1.50 mm; metal plate thicknesses from 0.125 mm to 0.6 mm. Minimum of 10 specimens per condition.
Thermal cycling / thermal fatigue:
- Defined combinations of low and high temperatures (e.g., low: −65 °C to +5 °C; high: +30 °C to +200 °C) with ±2 °C tolerances.
- Standard cycle counts: N = 0, 10, 100, 300, 1 000, 3 000 (other N allowed if reported).
- Standard exposure time: 30 min (adjustable for specimen heat capacity).
- Transfer time categories: **

Overview - ISO 17841:2015 (thermal fatigue test for fine ceramics substrate)

Key technical topics and requirements

Test specimens: Composite specimens consist of a fine ceramic plate with metal plates joined to both faces. Standard ceramic dimensions: length 40.0 mm, width 10.0 ± 0.5 mm. Ceramic thicknesses listed from 0.20 mm to 1.50 mm; metal plate thicknesses from 0.125 mm to 0.6 mm. Minimum of 10 specimens per condition.
Thermal cycling / thermal fatigue:
- Defined combinations of low and high temperatures (e.g., low: −65 °C to +5 °C; high: +30 °C to +200 °C) with ±2 °C tolerances.
- Standard cycle counts: N = 0, 10, 100, 300, 1 000, 3 000 (other N allowed if reported).
- Standard exposure time: 30 min (adjustable for specimen heat capacity).
- Transfer time categories: **

ISO 17841:2015 PDF

Технические детали

Abstract

Overview - ISO 17841:2015 (thermal fatigue test for fine ceramics substrate)

Key technical topics and requirements

Похожие стандарты

Abstract

Overview - ISO 17841:2015 (thermal fatigue test for fine ceramics substrate)

Key technical topics and requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts