ISO 17860:2014 PDF

Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of drying loss of ceramic granules

Название (английский):

ISO 17860:2014

Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of drying loss of ceramic granules

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 3
Дата публикации:: 17 апреля 2014 г.
Издание:: ISO IS 17860 edition 1 version 1
ICS:: 81.060.30

Тип поставки:

Full version45 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:45 €

Описание (английский):

ISO 17860:2014 specifies the testing method to determine the drying loss of granulated ceramic powders. The drying loss of granulated ceramic powders means the loss of mass that occurs from drying under specified conditions.

Технические детали

Технический комитет: ISO/TC 206 - Fine ceramics
SKU: ISO 17860:2014

Abstract

Overview

ISO 17860:2014 specifies a standardized test method for determining the drying loss of granulated ceramic powders (fine ceramics / advanced ceramics). Drying loss is the mass loss that occurs when granulated ceramic powders are dried under specified conditions - typically due to removal of water, solvents or volatile additives. The standard defines two accepted procedures (drying oven and moisture analyser), required apparatus, sampling, calculation and reporting requirements.

Key topics and requirements

Scope: Applies to granulated ceramic powders used in advanced/technical ceramics to quantify drying loss (percentage mass loss).
Principle: Drying loss L (%) = (m1 − m2) / m1 × 100, where m1 = initial (as‑received) mass and m2 = mass after drying.
Two procedures:
- Procedure 1 - Drying oven:
  - Oven temperature: (110 ± 5) °C typical (select lower if organics decompose).
  - Drying time: 2 h (with repeat drying until mass change

Overview

Key topics and requirements

Scope: Applies to granulated ceramic powders used in advanced/technical ceramics to quantify drying loss (percentage mass loss).
Principle: Drying loss L (%) = (m1 − m2) / m1 × 100, where m1 = initial (as‑received) mass and m2 = mass after drying.
Two procedures:
- Procedure 1 - Drying oven:
  - Oven temperature: (110 ± 5) °C typical (select lower if organics decompose).
  - Drying time: 2 h (with repeat drying until mass change

ISO 17860:2014 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Похожие стандарты

Abstract

Overview

Key topics and requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts