ISO 18319-2:2022 PDF

Fibre reinforced polymer (FRP) reinforcement for concrete structures — Part 2: Specifications of CFRP strips

Название (английский):

ISO 18319-2:2022

Fibre reinforced polymer (FRP) reinforcement for concrete structures — Part 2: Specifications of CFRP strips

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 6
Дата публикации:: 17 января 2022 г.
Издание:: ISO IS 18319 edition 1 version 1
ICS:: 83.120

Тип поставки:

Full version90 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:90 €

Описание (английский):

This document specifies requirements for unidirectional carbon fibre-reinforced polymer (CFRP) strips as external-bonded reinforcements on the concrete substrate. This document is applicable for the CFRP strips that: — consist of carbon fibre and thermoset resin; — are manufactured by pultrusion method; — have a carbon fibre fraction over 60 % by volume; and — have a thickness within 3 mm. This document specifies the methodologies to express the mechanical properties as characteristic values, appearance and dimensions, and sampling test.

Технические детали

Технический комитет: ISO/TC 71/SC 6 - Non-traditional reinforcing materials for concrete structures
SKU: ISO 18319-2:2022

Abstract

Overview

ISO 18319-2:2022 defines specifications for unidirectional carbon fibre‑reinforced polymer (CFRP) strips used as external‑bonded reinforcement on concrete structures. The standard applies to CFRP strips that: consist of carbon fibre and thermoset resin, are manufactured by the pultrusion method, have a carbon‑fibre fraction > 60% by volume, and a thickness ≤ 3 mm. It provides requirements and methods for expressing mechanical properties as characteristic values, appearance and dimensional tolerances, straightness, and sampling tests.

Key topics and requirements

Scope and materials: Unidirectional CFRP strips with thermoset resin, pultruded manufacture, >60% carbon fibre by volume, thickness within 3 mm.
Appearance: Strips must be free from visible defects such as cracks, whitening (incomplete curing), and blistering.
Dimensions & tolerances:
- Nominal width, thickness, cross‑sectional area and length are agreed between parties.
- Thickness tolerance: ±10% of nominal.
- Width and cross‑sectional area shall be no less than nominal (see standard for complete table).
- Length tolerances vary by nominal length (detailed bands for l ≥ 30 m, 30–10 m, 10–5 m,

Overview

Key topics and requirements

Scope and materials: Unidirectional CFRP strips with thermoset resin, pultruded manufacture, >60% carbon fibre by volume, thickness within 3 mm.
Appearance: Strips must be free from visible defects such as cracks, whitening (incomplete curing), and blistering.
Dimensions & tolerances:
- Nominal width, thickness, cross‑sectional area and length are agreed between parties.
- Thickness tolerance: ±10% of nominal.
- Width and cross‑sectional area shall be no less than nominal (see standard for complete table).
- Length tolerances vary by nominal length (detailed bands for l ≥ 30 m, 30–10 m, 10–5 m,

ISO 18319-2:2022 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Похожие стандарты

Abstract

Overview

Key topics and requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts