ISO 19095-3:2015 PDF

Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 3: Test methods

Название (английский):

ISO 19095-3:2015

Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 3: Test methods

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 15
Дата публикации:: 3 августа 2015 г.
Издание:: ISO IS 19095 edition 1 version 1
ICS:: 83.180

Тип поставки:

Full version225 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:225 €

Описание (английский):

ISO 19095-3:2015 specifies the test methods for the adhesion interface performance in plastic-metal assemblies.

Технические детали

Технический комитет: ISO/TC 61/SC 11 - Products
SKU: ISO 19095-3:2015

Abstract

Overview

ISO 19095-3:2015 specifies standardized test methods for evaluating the adhesion interface performance in plastic‑metal assemblies. It is Part 3 of the ISO 19095 series and focuses on practical, repeatable mechanical and sealing tests to characterize how well plastics bond to metals under controlled specimen conditioning and test conditions. The standard is intended to improve traceability and comparability of interface performance data used in safety‑critical sectors such as automotive and aerospace.

Key topics and requirements

Scope and conditioning
- Applies to test methods for the plastic‑metal adhesion interface; specimen conditioning follows ISO 19095‑1.
- Specimens must be free from twist, surface defects and have mutually perpendicular parallel surfaces; nonconforming specimens are rejected or machined.
Mechanical test methods included
- Tensile strength: machine capacity selected so rupture occurs between 10% and 80% full scale; recorded force accuracy within 1%; typical crosshead speed 10 mm/min; breaking stress = breaking load / joint area (MPa).
- Tensile lap‑shear strength: uses tensile machine plus specimen retainer; retainer design minimizes friction (metal grip gap ≈ specimen + 0.1 mm; plastic grip gap

Overview

Key topics and requirements

Scope and conditioning
- Applies to test methods for the plastic‑metal adhesion interface; specimen conditioning follows ISO 19095‑1.
- Specimens must be free from twist, surface defects and have mutually perpendicular parallel surfaces; nonconforming specimens are rejected or machined.
Mechanical test methods included
- Tensile strength: machine capacity selected so rupture occurs between 10% and 80% full scale; recorded force accuracy within 1%; typical crosshead speed 10 mm/min; breaking stress = breaking load / joint area (MPa).
- Tensile lap‑shear strength: uses tensile machine plus specimen retainer; retainer design minimizes friction (metal grip gap ≈ specimen + 0.1 mm; plastic grip gap

ISO 19095-3:2015 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Похожие стандарты

Abstract

Overview

Key topics and requirements

Похожие стандарты

Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies. Guidelines for the ap…

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines