ISO 1924-2:2008 PDF

Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)

Название (английский):

ISO 1924-2:2008

Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 12
Дата публикации:: 8 декабря 2008 г.
Издание:: ISO IS 1924 edition 3 version 1
ICS:: 85.060

Тип поставки:

Full version180 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:180 €

Описание (английский):

ISO 1924-2:2008 specifies a method for measuring the tensile strength, strain at break and tensile energy absorption of paper and board, using a testing machine operating at a constant rate of elongation (20 mm/min). ISO 1924-2:2008 also specifies equations for calculating the tensile index, the tensile energy absorption index and the modulus of elasticity. Testing in conformance with ISO 1924-2:2008 always includes the measurement of tensile strength. Measurement or calculation of other properties is subject to agreement between the parties concerned. ISO 1924-2:2008 is applicable to all papers and boards, including papers with a high strain at break if the results are within the capacity of the testing machine. It also applies to the components of corrugated board but not, however, to corrugated board itself.

Технические детали

Технический комитет: ISO/TC 6/SC 2 - Test methods and quality specifications for paper and board
SKU: ISO 1924-2:2008

Abstract

Overview

ISO 1924-2:2008 - Paper and board: Determination of tensile properties - Part 2 specifies a laboratory method to measure tensile properties of paper and board using a testing machine that applies a constant rate of elongation (20 mm/min). The standard defines how to determine tensile strength (always required), and - subject to agreement - strain at break, tensile energy absorption, tensile index, tensile energy absorption index and modulus of elasticity. It is applicable to most papers and boards (including corrugated board components) but not to corrugated board itself or to tissue products covered by ISO 12625-4.

Key topics and technical requirements

Test principle: Strain a prepared test piece to break at a constant elongation rate of 20 mm/min while recording force and, if required, elongation.
Measured and calculated properties:
- Tensile strength (maximum force per unit width)
- Strain at break (elongation relative to initial span)
- Tensile energy absorption (energy per unit surface area)
- Tensile index and tensile energy absorption index (normalized by grammage)
- Modulus of elasticity (slope of force–elongation curve)
Apparatus and accuracy:
- Tensile testing machine calibrated for force accuracy ±1% and elongation accuracy ±0.1% (extensometer recommended; see ISO 9513).
- Clamps must grip without slippage, aligned within 1° and adjustable to the test span (normally 180 ±1 mm).
- Means to record force–elongation and to integrate work done (for tensile energy absorption).
Sampling and conditioning: Follow ISO 186 for sampling and ISO 187 for conditioning; handle specimens to avoid moisture changes that affect mechanical results.
Rate dependence: Results vary with elongation rate - ISO 1924-2 (20 mm/min) produces different values than ISO 1924-3 (100 mm/min); increases of ~5–15% are common when rate is higher.

Applications and users

ISO 1924-2:2008 is intended for:

Paper and board manufacturers for product specification and QC
Independent testing laboratories and certification bodies
Converters, printers and packaging engineers evaluating tensile performance
R&D teams developing grades and coatings Practical applications include quality control of raw and finished rolls, comparative material assessment, supplier acceptance testing, and input to packaging design where tensile strength and energy absorption inform performance.

Related standards

ISO 1924-3 (constant rate 100 mm/min)
ISO 186 (sampling)
ISO 187 (conditioning)
ISO 534 / ISO 536 (thickness, grammage)
ISO 12625-4 (tissue tensile tests)
ISO 9513 (extensometer calibration)
ISO 5270 (laboratory sheets testing)

Keywords: ISO 1924-2:2008, tensile properties, paper and board, constant rate of elongation, 20 mm/min, tensile strength, tensile index, modulus of elasticity, tensile testing.

Overview

Key topics and technical requirements

Test principle: Strain a prepared test piece to break at a constant elongation rate of 20 mm/min while recording force and, if required, elongation.
Measured and calculated properties:
- Tensile strength (maximum force per unit width)
- Strain at break (elongation relative to initial span)
- Tensile energy absorption (energy per unit surface area)
- Tensile index and tensile energy absorption index (normalized by grammage)
- Modulus of elasticity (slope of force–elongation curve)
Apparatus and accuracy:
- Tensile testing machine calibrated for force accuracy ±1% and elongation accuracy ±0.1% (extensometer recommended; see ISO 9513).
- Clamps must grip without slippage, aligned within 1° and adjustable to the test span (normally 180 ±1 mm).
- Means to record force–elongation and to integrate work done (for tensile energy absorption).
Sampling and conditioning: Follow ISO 186 for sampling and ISO 187 for conditioning; handle specimens to avoid moisture changes that affect mechanical results.
Rate dependence: Results vary with elongation rate - ISO 1924-2 (20 mm/min) produces different values than ISO 1924-3 (100 mm/min); increases of ~5–15% are common when rate is higher.

Applications and users

ISO 1924-2:2008 is intended for:

Paper and board manufacturers for product specification and QC
Independent testing laboratories and certification bodies
Converters, printers and packaging engineers evaluating tensile performance
R&D teams developing grades and coatings Practical applications include quality control of raw and finished rolls, comparative material assessment, supplier acceptance testing, and input to packaging design where tensile strength and energy absorption inform performance.

Related standards

ISO 1924-3 (constant rate 100 mm/min)
ISO 186 (sampling)
ISO 187 (conditioning)
ISO 534 / ISO 536 (thickness, grammage)
ISO 12625-4 (tissue tensile tests)
ISO 9513 (extensometer calibration)
ISO 5270 (laboratory sheets testing)

Keywords: ISO 1924-2:2008, tensile properties, paper and board, constant rate of elongation, 20 mm/min, tensile strength, tensile index, modulus of elasticity, tensile testing.

ISO 1924-2:2008 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Applications and users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Applications and users

Related standards

Похожие стандарты

Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and te…

Metallic materials - Calibration of extensometer systems used in uniaxial testing - Technical Corrigendum 1 (…

Fibre ropes for offshore stationkeeping. General specification.

Anodizing of aluminium and its alloys. Method to test the surface abrasion resistance using glass-coated abra…

Paper and board. Determination of tensile properties. Constant rate of elongation method (20 mm/min).

Paper and board — Determination of tensile properties — Part 3: Constant rate of elongation method (100 mm/mi…

Electrodynamic vibration generating systems — Performance characteristics — Amendment 1

Anaesthetic and respiratory equipment - Tracheal tubes and connectors - Amendment 1: Reinstatement of third e…