ISO 19403-3:2024 PDF

Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method

Название (английский):

ISO 19403-3:2024

Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 11
Дата публикации:: 4 сентября 2024 г.
Издание:: ISO IS 19403 edition 2 version 1
ICS:: 87.040

Тип поставки:

Full version165 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:165 €

Описание (английский):

This document specifies a test method to measure the surface tension of liquids with an optical method using the pendant drop. The method can be applied for the characterization of liquid coating materials. If applied to liquids with non-Newtonian flow behaviour (as defined in ISO 3219-1:2021, 3.22), restrictions can apply. NOTE For other methods to determine the surface tension, see e.g. EN 14370 and ISO 1409.

Технические детали

Технический комитет: ISO/TC 35/SC 9 - General test methods for paints and varnishes
SKU: ISO 19403-3:2024

Abstract

Overview

ISO 19403-3:2024 - Paints and varnishes - Wettability - Part 3 specifies an optical test method to determine the surface tension of liquids using the pendant drop method. The standard defines how to form and analyse a pendant drop with a drop contour analysis system and to calculate surface tension from the drop shape via the Young–Laplace equation. It is intended mainly for characterization of liquid coating materials; restrictions can apply when testing non‑Newtonian liquids.

Key topics and technical requirements

Method principle: Form a pendant drop on a cylindrical needle and analyse its axisymmetric contour to derive surface tension from Young–Laplace.
Apparatus: State‑of‑the‑art drop contour analysis system (camera, optical system, light source), a dosing unit/micro‑syringe and a needle with outside diameter between 0.5 mm and 2.5 mm (needle choice depends on σ/Δρ).
Sample handling: Representative sampling per ISO 15528; density of liquid and ambient phase measured per the ISO 2811 series.
Test conditions: Conduct at (23 ± 2) °C and (50 ± 5) % RH; enter local gravity value in instrument software.
Image quality & evaluation:
- Axially symmetric drop contour mandatory.
- Shape parameter B recommended to be 0.60 ± 0.06 (Annex B).
- Fit error should be

Overview

Key topics and technical requirements

Method principle: Form a pendant drop on a cylindrical needle and analyse its axisymmetric contour to derive surface tension from Young–Laplace.
Apparatus: State‑of‑the‑art drop contour analysis system (camera, optical system, light source), a dosing unit/micro‑syringe and a needle with outside diameter between 0.5 mm and 2.5 mm (needle choice depends on σ/Δρ).
Sample handling: Representative sampling per ISO 15528; density of liquid and ambient phase measured per the ISO 2811 series.
Test conditions: Conduct at (23 ± 2) °C and (50 ± 5) % RH; enter local gravity value in instrument software.
Image quality & evaluation:
- Axially symmetric drop contour mandatory.
- Shape parameter B recommended to be 0.60 ± 0.06 (Annex B).
- Fit error should be

ISO 19403-3:2024 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Paints, varnishes and raw materials for paints and varnishes. Sampling.

Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2023)

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies