Overview

ISO 20053:2017 - Ships and marine technology: Marine environment protection - Specifications on design and selection of sorbents - provides technical guidance for the design, selection, designation and marking of sorbents used in marine oil-spill response. The standard helps manufacturers and purchasers evaluate sorbent materials and products by defined technical criteria. It does not prescribe operational procedures or address every safety concern, nor does it cover loose/bulk sorbents for open-water use.

Key topics and technical requirements

ISO 20053:2017 defines material types, product forms and selection criteria for marine sorbents. Key technical topics include:

Sorbent materials and forms
- Synthetic organic (polypropylene, polyethylene, nylon, polyester, polyurethane foam)
- Natural organic (peat, cellulose, straw, wool, coconut husk, wood chips, etc.)
- Inorganic (expanded perlite, glass wool, vermiculite, volcanic ash)
- Forms: booms, pads/sheets, pillows, pom-poms, rolls/sweeps
Selection criteria
- Buoyancy: must float without oil for at least 3 days; when saturated with two oil types, must remain afloat for at least 6 days
- Oil retention: retain sorbed oil when removed from water
- Sorption capacity: expressed as g oil / g sorbent; viscosity of target oil is a primary factor (example test oils: 5 cSt for low viscosity, 3 000 cSt for high viscosity)
- Reusability: ability to be squeezed and reused (must avoid re-oiling)
- Biodegradability: guidance for biodegradable sorbents when recovery is difficult
- Disposal: prescribed final disposition options and material-specific disposal instructions
Manufacturer data and marking
- Required product information (dimensions, material, colour, form, buoyancy, oil retention, sorption capacity, reusability, biodegradability, disposal method, transport unit, weight/volume, safety instructions)
- Marking requirements (manufacturer name/address, form and dimensions, year of manufacture/expiry where applicable, transport unit weight)

Applications and users

ISO 20053 is practical for:

Sorbent manufacturers designing and labeling marine sorbents
Procurement officers and maritime purchasers selecting sorbent booms, pads, rolls
Oil-spill response teams and environmental agencies specifying equipment for shoreline and surface recovery
Ship operators and offshore facilities planning pollution-control kits

The standard improves product comparability and supports informed selection based on buoyancy, sorption capacity and disposal considerations.

Related standards

ISO 16165 - Terminology relating to oil spill response (referenced for terms)
Bibliography in ISO 20053 lists national standards (e.g., AFNOR NF T90 series) that may provide complementary test/labeling guidance

Keywords: ISO 20053:2017, sorbents, marine environment protection, oil spill response, sorbent selection, buoyancy, sorption capacity, oil retention, sorbent disposal.

Overview

Key topics and technical requirements

ISO 20053:2017 defines material types, product forms and selection criteria for marine sorbents. Key technical topics include:

Sorbent materials and forms
- Synthetic organic (polypropylene, polyethylene, nylon, polyester, polyurethane foam)
- Natural organic (peat, cellulose, straw, wool, coconut husk, wood chips, etc.)
- Inorganic (expanded perlite, glass wool, vermiculite, volcanic ash)
- Forms: booms, pads/sheets, pillows, pom-poms, rolls/sweeps
Selection criteria
- Buoyancy: must float without oil for at least 3 days; when saturated with two oil types, must remain afloat for at least 6 days
- Oil retention: retain sorbed oil when removed from water
- Sorption capacity: expressed as g oil / g sorbent; viscosity of target oil is a primary factor (example test oils: 5 cSt for low viscosity, 3 000 cSt for high viscosity)
- Reusability: ability to be squeezed and reused (must avoid re-oiling)
- Biodegradability: guidance for biodegradable sorbents when recovery is difficult
- Disposal: prescribed final disposition options and material-specific disposal instructions
Manufacturer data and marking
- Required product information (dimensions, material, colour, form, buoyancy, oil retention, sorption capacity, reusability, biodegradability, disposal method, transport unit, weight/volume, safety instructions)
- Marking requirements (manufacturer name/address, form and dimensions, year of manufacture/expiry where applicable, transport unit weight)

Applications and users

ISO 20053 is practical for:

Sorbent manufacturers designing and labeling marine sorbents
Procurement officers and maritime purchasers selecting sorbent booms, pads, rolls
Oil-spill response teams and environmental agencies specifying equipment for shoreline and surface recovery
Ship operators and offshore facilities planning pollution-control kits

The standard improves product comparability and supports informed selection based on buoyancy, sorption capacity and disposal considerations.

Related standards

ISO 16165 - Terminology relating to oil spill response (referenced for terms)
Bibliography in ISO 20053 lists national standards (e.g., AFNOR NF T90 series) that may provide complementary test/labeling guidance

Keywords: ISO 20053:2017, sorbents, marine environment protection, oil spill response, sorbent selection, buoyancy, sorption capacity, oil retention, sorbent disposal.

ISO 20053:2017 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Applications and users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Applications and users

Related standards

Похожие стандарты

Ships and marine technology. Marine environment protection. Specifications on design and selection of sorbent…

Tracked Changes. Ships and marine technology. Marine environment protection. Vocabulary relating to oil spill…

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies