ISO 21465:2025 PDF

Test method for CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling

Название (английский):

ISO 21465:2025

Test method for CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 4 марта 2025 г.
Издание:: ISO IS 21465 edition 1 version 1
ICS:: 25.220.01

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

This document specifies requirements for the test method of the CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling, including the process and the determination of failure after corrosion. The document does not apply to such coatings on plastics to be used for aerospace, electronics and other engineering fields.

Технические детали

Технический комитет: ISO/TC 107 - Metallic and other inorganic coatings
SKU: ISO 21465:2025

Abstract

Overview

ISO 21465:2025 - Test method for CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling specifies a standardized laboratory method to evaluate how calcia–magnesia–aluminosilicate (CMAS) attacks thermal/environmental barrier coatings (T/EBCs) during repeated heating and cooling. The standard covers both test procedures without a temperature gradient (muffle furnace method) and with a thermal gradient (flame exposure with backside cooling), plus criteria for determining coating failure after CMAS corrosion.

Key topics and technical requirements

Test principle - Dynamic thermal cycling comprises heating, holding and cooling phases; CMAS is applied to the T/EBC surface and damage is quantified after repeated cycles.
Two test modes
- Without thermal gradient: CMAS-coated specimens are inserted into a muffle furnace (example temperature 1 250 °C), heated (typical hold 5 min) then cooled (typical 5 min) by air extraction. Surface temperature must not exceed substrate service limits (e.g.,

Overview

Key topics and technical requirements

Test principle - Dynamic thermal cycling comprises heating, holding and cooling phases; CMAS is applied to the T/EBC surface and damage is quantified after repeated cycles.
Two test modes
- Without thermal gradient: CMAS-coated specimens are inserted into a muffle furnace (example temperature 1 250 °C), heated (typical hold 5 min) then cooled (typical 5 min) by air extraction. Surface temperature must not exceed substrate service limits (e.g.,

ISO 21465:2025 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts