ISO 22282-3:2012 PDF

Geotechnical investigation and testing — Geohydraulic testing — Part 3: Water pressure tests in rock

Название (английский):

ISO 22282-3:2012

Geotechnical investigation and testing — Geohydraulic testing — Part 3: Water pressure tests in rock

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 26
Дата публикации:: 1 июня 2012 г.
Издание:: ISO IS 22282 edition 1 version 1
ICS:: 93.020

Тип поставки:

Full version390 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:5 раб. дн. (перевод)

Цена:390 €

Описание (английский):

ISO 22282-3:2012 specifies the requirements for water pressures tests (WPT) carried out in boreholes drilled into rock as part of geotechnical investigation and testing according to EN 1997-1 and EN 1997-2. The tests are used to investigate the following: hydraulic properties of the rock mass, which are mainly governed by discontinuities; absorption capacity of the rock mass; tightness of the rock mass; effectiveness of grouting; geomechanical behaviour, e.g. hydrofracturing, hydrojacking.

Технические детали

Технический комитет: ISO/TC 182 - Geotechnics
SKU: ISO 22282-3:2012

Abstract

Overview - ISO 22282-3:2012 (Water pressure tests in rock)

ISO 22282-3:2012 is the International Standard that specifies requirements for water pressure tests (WPT) performed in boreholes drilled into rock as part of geotechnical investigation and testing (referencing EN 1997-1 and EN 1997-2). The standard focuses on geohydraulic testing to evaluate rock mass hydraulic behaviour governed by discontinuities, including permeability (lugeon), absorption, tightness, groutability and geomechanical responses such as hydrofracturing and hydrojacking.

Key technical topics and requirements

Test types: single pressure step tests (tightness checks) and multiple pressure step tests (investigate water take and discontinuity behaviour).
Equipment: pressure-controlled pump, pipes/hoses, single or double inflatable packer assemblies, shut-off valve, pressure measuring devices/ transducers, flow meter and data recording system.
Packer specifications: effective sleeve length ≥ 10× borehole diameter and ≥ 0.5 m; inflation pressure ≥ 30% above expected maximum test pressure.
Pump & flow: typical pump output up to 150 l/min; 1.5 MPa often suitable; oscillation-free flow or pressure dampers within ±3%.
Flow meter: measuring range matched to expected flow; accuracy better than 3%; dual meters may be used to cover wide ranges (examples given for ~10 and ~100 l/min ranges).
Test procedure: borehole cleaning by flushing prior to testing; record pressure and water flow simultaneously for each pressure step; each step lasts at least 10 minutes. If steady state is not reached, continue until variation

Overview - ISO 22282-3:2012 (Water pressure tests in rock)

Key technical topics and requirements

Test types: single pressure step tests (tightness checks) and multiple pressure step tests (investigate water take and discontinuity behaviour).
Equipment: pressure-controlled pump, pipes/hoses, single or double inflatable packer assemblies, shut-off valve, pressure measuring devices/ transducers, flow meter and data recording system.
Packer specifications: effective sleeve length ≥ 10× borehole diameter and ≥ 0.5 m; inflation pressure ≥ 30% above expected maximum test pressure.
Pump & flow: typical pump output up to 150 l/min; 1.5 MPa often suitable; oscillation-free flow or pressure dampers within ±3%.
Flow meter: measuring range matched to expected flow; accuracy better than 3%; dual meters may be used to cover wide ranges (examples given for ~10 and ~100 l/min ranges).
Test procedure: borehole cleaning by flushing prior to testing; record pressure and water flow simultaneously for each pressure step; each step lasts at least 10 minutes. If steady state is not reached, continue until variation

ISO 22282-3:2012 PDF

Технические детали

Abstract

Overview - ISO 22282-3:2012 (Water pressure tests in rock)

Key technical topics and requirements

Похожие стандарты

Abstract

Overview - ISO 22282-3:2012 (Water pressure tests in rock)

Key technical topics and requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts