ISO 2244:2000 PDF

Packaging — Complete, filled transport packages and unit loads — Horizontal impact tests

Название (английский):

ISO 2244:2000

Packaging — Complete, filled transport packages and unit loads — Horizontal impact tests

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 24 февраля 2000 г.
Издание:: ISO IS 2244 edition 3 version 1
ICS:: 55.180.40

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

This International Standard specifies methods of horizontal impact testing (horizontal or inclined plane test and pendulum test) on a complete, filled transport package or a unit load. The test may be performed either as a single test to investigate the effects of horizontal impact or as part of a sequence of tests designed to measure the ability of a package or a unit load to withstand a distribution system that includes a horizontal impact hazard.

Технические детали

Технический комитет: ISO/TC 122/SC 3 - Performance requirements and tests for means of packaging, packages and unit loads (as required by ISO/TC 122)
SKU: ISO 2244:2000

Abstract

Overview

ISO 2244:2000 - "Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests" specifies validated methods for subjecting complete, filled transport packages or unit loads to horizontal impact. The standard covers three test types: the inclined plane test, the horizontal plane test, and the pendulum test. Its purpose is to evaluate how packages and unit loads withstand a distribution system that includes horizontal impact hazards, either as a single event or part of a test sequence.

Key topics and technical requirements

Test principle: apply a horizontal velocity to a filled package or unit load and bring it to a halt by impact with a vertical (or inclined) impact surface.
Apparatus types:
- Inclined plane tester (track inclined at 10° ± 1°).
- Horizontal plane tester (horizontal track, mechanically driven carriage).
- Pendulum apparatus (platform suspended on rods/ropes).
Impact surface: plane inclined to 10° ± 1° (inclined test) or vertical within 1° (horizontal/pendulum tests). Surface must be rigid - deflection not more than 0.25 mm under 160 kg/cm load.
Velocity and tolerance: impact velocity shall be within ±5% of the predetermined value.
Specimen preparation: test specimens must be filled and closed as for distribution; simulated contents may be used if they match dimensions and physical properties.
Attitude tolerances: strict angular tolerances for face, edge and corner impacts (e.g., face-to-impact-plane angle

Overview

Key topics and technical requirements

Test principle: apply a horizontal velocity to a filled package or unit load and bring it to a halt by impact with a vertical (or inclined) impact surface.
Apparatus types:
- Inclined plane tester (track inclined at 10° ± 1°).
- Horizontal plane tester (horizontal track, mechanically driven carriage).
- Pendulum apparatus (platform suspended on rods/ropes).
Impact surface: plane inclined to 10° ± 1° (inclined test) or vertical within 1° (horizontal/pendulum tests). Surface must be rigid - deflection not more than 0.25 mm under 160 kg/cm load.
Velocity and tolerance: impact velocity shall be within ±5% of the predetermined value.
Specimen preparation: test specimens must be filled and closed as for distribution; simulated contents may be used if they match dimensions and physical properties.
Attitude tolerances: strict angular tolerances for face, edge and corner impacts (e.g., face-to-impact-plane angle

ISO 2244:2000 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts