ISO 23100:2024 PDF

Decorative physical vapor deposition (PVD) coatings on kitchen and sanitary ware fittings — Specification and test methods

Название (английский):

ISO 23100:2024

Decorative physical vapor deposition (PVD) coatings on kitchen and sanitary ware fittings — Specification and test methods

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 6 декабря 2024 г.
Издание:: ISO IS 23100 edition 1 version 1
ICS:: 25.220.20

Тип поставки:

Full version105 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

This document specifies the performance and test methods of decorative physical vapor deposition (PVD) coatings on kitchen and sanitary ware fittings. This document is applicable to performance evaluation for decorative PVD coatings on kitchen and sanitary ware fittings.

Технические детали

Технический комитет: ISO/TC 107/SC 9 - Physical vapor deposition coatings
SKU: ISO 23100:2024

Abstract

Overview

ISO 23100:2024 - Decorative physical vapor deposition (PVD) coatings on kitchen and sanitary ware fittings - specifies performance requirements and test methods for decorative PVD coatings applied to kitchen and sanitary fittings. Published by ISO (prepared by ISO/TC 107/SC 9), this standard is intended for performance evaluation of decorative PVD finishes on common substrates such as copper alloy, zinc alloy, stainless steel, aluminium alloy and ABS.

Key topics and technical requirements

The standard defines test methods, acceptance criteria and process considerations for decorative PVD coatings. Major technical topics include:

Coating process and pretreatment
- Principle of PVD deposition and recommended pre-treatment: alkali degreasing, deionized water rinses and acid activation.
- Typical vacuum, gas and voltage ranges and note on post‑treatment (e.g., polishing).
Discoloration resistance
- Measured by CIELAB ΔE using a spectrophotometer with D65 light source and 10° observation angle.
- Test: immersion/boiling in distilled water at 60 ± 0.5 °C for 24 h, followed by ΔE calculation.
- Rating levels (examples): Level 1: ΔE ≤ 0.5, up to Level 4: 2

Overview

Key topics and technical requirements

The standard defines test methods, acceptance criteria and process considerations for decorative PVD coatings. Major technical topics include:

Coating process and pretreatment
- Principle of PVD deposition and recommended pre-treatment: alkali degreasing, deionized water rinses and acid activation.
- Typical vacuum, gas and voltage ranges and note on post‑treatment (e.g., polishing).
Discoloration resistance
- Measured by CIELAB ΔE using a spectrophotometer with D65 light source and 10° observation angle.
- Test: immersion/boiling in distilled water at 60 ± 0.5 °C for 24 h, followed by ΔE calculation.
- Rating levels (examples): Level 1: ΔE ≤ 0.5, up to Level 4: 2

ISO 23100:2024 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts