ISO 23213:2022 PDF

Carbon steel wire for bedding and seating springs

Название (английский):

ISO 23213:2022

Carbon steel wire for bedding and seating springs

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 23 марта 2022 г.
Издание:: ISO IS 23213 edition 1 version 1
ICS:: 77.140.25

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

This document specifies requirements for carbon steel wire of round cross-section supplied in the cold-draw condition intended for the manufacture of springs for bedding and seating used in the automotive and furniture manufacturing industries. This document is applicable to wire supplies in the uncoated condition, that is, without a metallic coating.

Технические детали

Технический комитет: ISO/TC 17/SC 17 - Steel wire rod and wire products
SKU: ISO 23213:2022

Abstract

Overview

ISO 23213:2022 - Carbon steel wire for bedding and seating springs - specifies requirements for cold-drawn, round carbon steel wire supplied in the uncoated condition for manufacture of springs used in bedding and seating in the automotive and furniture industries. The standard defines classification, dimensional and mechanical requirements, testing, inspection, packing and marking to ensure consistent spring performance and interchangeability.

Key Topics and Requirements

Scope & classification
- Applicable nominal diameters: 0.80 mm to 6.00 mm.
- Five wire types (I–V) for different spring applications (e.g., pocket, Bonnell, link, edging, sinuous) with recommended diameter ranges.
Diameter, tolerance & geometry
- Diameter measured as mean of two orthogonal micrometer readings; specified tolerances vary by diameter range (examples provided in the standard).
- Ovality limits, wire cast (circular and helix cast) and tip rise requirements are specified.
Mechanical properties
- Tensile strength requirements given by type and diameter (detailed ranges for Types I–V).
- Maximum tensile range variation within a batch: 150 MPa.
Forming tests
- Wrapping test (ISO 7802) for wire

Overview

Key Topics and Requirements

Scope & classification
- Applicable nominal diameters: 0.80 mm to 6.00 mm.
- Five wire types (I–V) for different spring applications (e.g., pocket, Bonnell, link, edging, sinuous) with recommended diameter ranges.
Diameter, tolerance & geometry
- Diameter measured as mean of two orthogonal micrometer readings; specified tolerances vary by diameter range (examples provided in the standard).
- Ovality limits, wire cast (circular and helix cast) and tip rise requirements are specified.
Mechanical properties
- Tensile strength requirements given by type and diameter (detailed ranges for Types I–V).
- Maximum tensile range variation within a batch: 150 MPa.
Forming tests
- Wrapping test (ISO 7802) for wire

ISO 23213:2022 PDF

Технические детали

Abstract

Overview

Key Topics and Requirements

Похожие стандарты

Abstract

Overview

Key Topics and Requirements

Похожие стандарты

Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015)

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines