ISO 24181-1:2024 PDF

Rare earth — Determination of non-rare earth impurities in individual rare earth metals and their oxides — ICP-AES — Part 1: Analysis of Al, Ca, Mg, Fe and Si

Название (английский):

ISO 24181-1:2024

Rare earth — Determination of non-rare earth impurities in individual rare earth metals and their oxides — ICP-AES — Part 1: Analysis of Al, Ca, Mg, Fe and Si

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 11
Дата публикации:: 2 августа 2024 г.
Издание:: ISO IS 24181 edition 1 version 1
ICS:: 13.030.30

Тип поставки:

Full version165 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:165 €

Описание (английский):

This document describes procedures for the determination of non-rare earth impurities in individual rare earth metals and their oxides through the use of inductively coupled plasma atomic emission spectroscopy (ICP-AES). Magnesium (Mg), aluminum (Al), silicon (Si), calcium (Ca) and iron (Fe) are included as non-rare earth impurity elements, and the measurement ranges for each impurity element are specified. The applicable measurement range (mass fraction %) of magnesium, aluminum, silicon and calcium is from 0,001 to 0,2, and that of iron is from 0,001 to 0,5. The verified measurement ranges in the interlaboratory tests are described later in this document.

Технические детали

Технический комитет: ISO/TC 298 - Rare earth
SKU: ISO 24181-1:2024

Abstract

Overview

ISO 24181-1:2024 specifies a harmonized analytical method for the determination of non-rare earth impurities (Al, Ca, Mg, Fe, Si) in individual rare earth metals and their oxides using inductively coupled plasma atomic emission spectroscopy (ICP‑AES). It defines applicable and verified measurement ranges, sample preparation by acid digestion, calibration with matrix matching, and calculation/precision reporting to ensure reproducible quantification across testing laboratories.

Key topics and requirements

Analytes covered: Magnesium (Mg), Aluminum (Al), Silicon (Si), Calcium (Ca), Iron (Fe).
Applicable measurement ranges (mass fraction %):
- Mg, Al, Si, Ca: 0.001 to 0.2
- Fe: 0.001 to 0.5
Verified interlaboratory ranges: Mg 0.002–0.06; Al 0.003–0.03; Si 0.002–0.03; Ca 0.004–0.08; Fe 0.003–0.03.
Analytical technique: ICP‑AES (also called ICP‑OES) with selected emission lines and instrument settings suitable for these ranges.
Sample preparation: Acid digestion (complete matrix dissolution). If insoluble residue remains, results are to be reported as imprecise.
Calibration: Calibration‑curve method with matrix matching using matrix solution and stock solutions; blank/matrix used to determine LOQ.
LOQ definition: Ten times the standard deviation of blank measurements. LOQ must be below the lower limit of the measurement range.
Quality/precision: Includes interlaboratory test results, regression formulae for precision, and required reporting elements.
Safety note: Method involves hazardous chemicals and procedures; users must follow relevant health and safety standards.

Practical applications and users

Producers of rare‑earth metals and oxides: quality control, acceptance testing, process monitoring.
Analytical laboratories: routine impurity assays using ICP‑AES and validated sample prep.
Buyers, traders, and specifiers: contract testing and verification of material purity for commercial transactions.
R&D and materials scientists: impurity profiling to correlate properties with trace contaminants.
Regulatory bodies and conformity assessment: consistent method for comparative data and dispute resolution.

Benefits: improves comparability of impurity data, reduces analytical discrepancies, and supports material specification and supply‑chain transparency for rare‑earth products.

Related standards

ISO 11885 - ICP‑OES determination of selected elements (general guidance)
ISO 22444‑1 / ISO 22444‑2 - Rare earth vocabulary (minerals, oxides, metals)
ISO 648, ISO 1042, ISO 3696 - Laboratory glassware and water for analytical use
ISO 15202 series - Safety and handling of rare-earth materials

Keywords: ISO 24181-1:2024, rare earth impurities, ICP‑AES, aluminum, calcium, magnesium, iron, silicon, acid digestion, calibration curve, matrix matching, LOQ, measurement ranges.

Overview

Key topics and requirements

Analytes covered: Magnesium (Mg), Aluminum (Al), Silicon (Si), Calcium (Ca), Iron (Fe).
Applicable measurement ranges (mass fraction %):
- Mg, Al, Si, Ca: 0.001 to 0.2
- Fe: 0.001 to 0.5
Verified interlaboratory ranges: Mg 0.002–0.06; Al 0.003–0.03; Si 0.002–0.03; Ca 0.004–0.08; Fe 0.003–0.03.
Analytical technique: ICP‑AES (also called ICP‑OES) with selected emission lines and instrument settings suitable for these ranges.
Sample preparation: Acid digestion (complete matrix dissolution). If insoluble residue remains, results are to be reported as imprecise.
Calibration: Calibration‑curve method with matrix matching using matrix solution and stock solutions; blank/matrix used to determine LOQ.
LOQ definition: Ten times the standard deviation of blank measurements. LOQ must be below the lower limit of the measurement range.
Quality/precision: Includes interlaboratory test results, regression formulae for precision, and required reporting elements.
Safety note: Method involves hazardous chemicals and procedures; users must follow relevant health and safety standards.

Practical applications and users

Producers of rare‑earth metals and oxides: quality control, acceptance testing, process monitoring.
Analytical laboratories: routine impurity assays using ICP‑AES and validated sample prep.
Buyers, traders, and specifiers: contract testing and verification of material purity for commercial transactions.
R&D and materials scientists: impurity profiling to correlate properties with trace contaminants.
Regulatory bodies and conformity assessment: consistent method for comparative data and dispute resolution.

Benefits: improves comparability of impurity data, reduces analytical discrepancies, and supports material specification and supply‑chain transparency for rare‑earth products.

Related standards

ISO 11885 - ICP‑OES determination of selected elements (general guidance)
ISO 22444‑1 / ISO 22444‑2 - Rare earth vocabulary (minerals, oxides, metals)
ISO 648, ISO 1042, ISO 3696 - Laboratory glassware and water for analytical use
ISO 15202 series - Safety and handling of rare-earth materials

Keywords: ISO 24181-1:2024, rare earth impurities, ICP‑AES, aluminum, calcium, magnesium, iron, silicon, acid digestion, calibration curve, matrix matching, LOQ, measurement ranges.

ISO 24181-1:2024 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Practical applications and users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and requirements

Practical applications and users

Related standards

Похожие стандарты

Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometr…

Rare earth — Vocabulary — Part 1: Minerals, oxides and other compounds

Rare earth. Vocabulary. Metals and their alloys.

Road vehicles — Measurement techniques in impact tests — Instrumentation — Amendment 1

Oil and gas industries including lower carbon energy. Equipment for well cementing. Casing bow-spring central…

Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)

Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled p…