ISO 3382-1:2009 PDF

Acoustics — Measurement of room acoustic parameters — Part 1: Performance spaces

Название (английский):

ISO 3382-1:2009

Acoustics — Measurement of room acoustic parameters — Part 1: Performance spaces

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 26
Дата публикации:: 28 мая 2009 г.
Издание:: ISO IS 3382 edition 1 version 1
ICS:: 91.120.20

Тип поставки:

Full version390 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:5 раб. дн. (перевод)

Цена:390 €

Описание (английский):

ISO 3382-1:2009 specifies methods for the measurement of reverberation time and other room acoustical parameters in performance spaces. It describes the measurement procedure, the apparatus needed, the coverage required, and the method of evaluating the data and presenting the test report. It is intended for the application of modern digital measuring techniques and for the evaluation of room acoustical parameters derived from impulse responses.

Технические детали

Технический комитет: ISO/TC 43/SC 2 - Building acoustics
SKU: ISO 3382-1:2009

Abstract

Overview

ISO 3382-1:2009 - "Acoustics - Measurement of room acoustic parameters - Part 1: Performance spaces" specifies standardized methods for measuring reverberation time and other room acoustical parameters in performance spaces (concert halls, theatres, auditoria). The standard defines measurement procedures, required apparatus, coverage (positioning and spatial averaging), data evaluation from impulse responses, and test-report presentation. It is intended for modern digital measuring techniques and for deriving auditorium measures from recorded impulse responses.

Key topics and technical requirements

Parameters covered: Reverberation time (T), early-decay measures and other room acoustic metrics derived from impulse responses (see annexes for auditorium, binaural and stage measures).
Measurement methods: Interrupted-noise method and integrated impulse-response method (reverse-time integration of squared impulse responses).
Equipment:
- Sound source: near-omnidirectional; Table 1 lists allowable directivity deviations by octave band. Source level must provide sufficient dynamic range (e.g., ≥45 dB above background per band; ≥35 dB if only T is required).
- Microphones and filters: Omnidirectional microphones; microphone diaphragm preferably ≤13 mm (up to 26 mm allowed with correction). Measurement systems should meet IEC 61672-1 Type 1 and IEC 61260 filter requirements.
- Recording: No AGC; record length at least 5 s plus expected reverberation time; playback/record speed constraints when using tape-based systems.
Signal processing: Use of MLS or sine-sweep techniques to derive impulse responses; reverse-time integration to form decay curves.
Averaging and evaluation: Spatial averaging across receiver positions; evaluation of decay curves (averaging time close to T/30 for exponential averaging, or

Overview

Key topics and technical requirements

Parameters covered: Reverberation time (T), early-decay measures and other room acoustic metrics derived from impulse responses (see annexes for auditorium, binaural and stage measures).
Measurement methods: Interrupted-noise method and integrated impulse-response method (reverse-time integration of squared impulse responses).
Equipment:
- Sound source: near-omnidirectional; Table 1 lists allowable directivity deviations by octave band. Source level must provide sufficient dynamic range (e.g., ≥45 dB above background per band; ≥35 dB if only T is required).
- Microphones and filters: Omnidirectional microphones; microphone diaphragm preferably ≤13 mm (up to 26 mm allowed with correction). Measurement systems should meet IEC 61672-1 Type 1 and IEC 61260 filter requirements.
- Recording: No AGC; record length at least 5 s plus expected reverberation time; playback/record speed constraints when using tape-based systems.
Signal processing: Use of MLS or sine-sweep techniques to derive impulse responses; reverse-time integration to form decay curves.
Averaging and evaluation: Spatial averaging across receiver positions; evaluation of decay curves (averaging time close to T/30 for exponential averaging, or

ISO 3382-1:2009 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Electroacoustics - Sound level meters - Part 1: Specifications

Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies