Overview
ISO 4525:2003 - Metallic coatings - Electroplated coatings of nickel plus chromium on plastics materials - defines requirements for decorative electroplated coatings of nickel plus chromium on plastics, with options for either a copper or a ductile nickel undercoat to meet thermal cycle resistance. The standard is intended for decorative applications (not engineering plastics) and sets out designation, thicknesses, testing and acceptance criteria, and information purchasers must supply to electroplaters.
Key topics and requirements
- Scope and purpose: Specifies materials, appearance options (bright, dull, satin), and limits application to decorative electroplated nickel + chromium on plastics.
- Undercoat options: Permits copper undercoats (ductile, levelling acid copper) or ductile nickel undercoats (designated dp) to meet thermal cycle requirements - reflecting reclamation and environmental considerations.
- Designation system: A structured naming convention (e.g., Electroplated coating ISO 4525 - PL/Cu15a Ni10b Cr mp) that identifies base (PL), undercoat (Cu or Ni), layer types (b, s, d, dp), and minimum local thicknesses in micrometres.
- Service condition numbers: Scale 1–5 (mild to exceptionally severe) links service environment severity to the required coating construction and thicknesses.
- Types of chromium finishes:
- r = regular chromium (min. thickness 0.3 µm)
- mc = micro-cracked chromium (defined crack density; may require greater thickness)
- mp = micro-porous chromium (defined pore count; pores invisible to unaided eye)
- Testing and inspection: Includes thermal cycle testing (Annex A), ductility (Annex C), sulfur analysis in nickel (Annex D), pore/crack determination for chromium (Annex E), thickness measurement methods (Annex F), combined thermal/corrosion tests (Annex G), and sampling by attributes (ISO 4519). STEP testing (ASTM B764) is referenced for multilayer nickel analysis.
- Purchaser-supplied information: Buyers must specify designation, finish, significant surfaces, undercoat choice for thermal cycles, corrosion/thermal test sequencing, sampling plan and plastic type.
Applications and who uses this standard
- Industries: Automotive trim, plumbing fixtures, consumer electronics, decorative hardware and trim suppliers where chrome-look finishes are applied to plastic components.
- Users: Electroplaters, product designers, purchasing/specification engineers, quality and test laboratories, and coating process licensors. The standard helps ensure consistent decorative appearance, durability to thermal cycling and corrosion, and recyclability considerations.
Related standards
ISO 4525 references and aligns with measurement and test standards such as: ISO 1463, ISO 2064, ISO 3497, ISO 4519, ISO 9227 (salt spray), ISO 8401 (ductility review) and ASTM B764 (STEP). These support thickness measurement, corrosion testing and inspection methods.
Keywords: ISO 4525:2003, electroplated coatings, nickel plus chromium, plastics, metallic coatings, copper undercoat, ductile nickel undercoat, thermal cycle, micro-cracked chromium, micro-porous chromium, coating thickness.