ISO 5347-16:1993 PDF

Methods for the calibration of vibration and shock pick-ups — Part 16: Testing of mounting torque sensitivity

Название (английский):

ISO 5347-16:1993

Methods for the calibration of vibration and shock pick-ups — Part 16: Testing of mounting torque sensitivity

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 2
Дата публикации:: 16 декабря 1993 г.
Издание:: ISO IS 5347 edition 1 version 1
ICS:: 17.160

Тип поставки:

Full version30 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:30 €

Описание (английский):

Lays down detailed specifications for the instrumentation and procedure to be used for mounting torque sensitivity testing. Applies to pick-ups mounted by screws, bolts or other threaded fasteners. The change in calibration factor due to the mounting torque is determined. Is applicable for a mounting torque range of one-half of the specified value, the specified value und twice the value of the specified mounting torque.

Технические детали

Технический комитет: ISO/TC 108 - Mechanical vibration, shock and condition monitoring
SKU: ISO 5347-16:1993

Abstract

Overview

ISO 5347-16:1993 specifies instrumentation and procedures for measuring the mounting torque sensitivity of vibration and shock pick-ups (e.g., accelerometers) that are mounted with screws, bolts or other threaded fasteners. The standard defines how to determine the change in calibration factor caused by different mounting torques, and applies to tests at one-half of the specified mounting torque, the specified value, and twice the specified value.

Key topics and requirements

Scope: Tests apply to pick-ups mounted by threaded fasteners; measures change in calibration factor with mounting torque.
Test range: Three torque points - one-half of the specified torque, the specified torque, and twice the specified torque.
Test environment: Room temperature maintained at 23 °C ± 3 °C.
Vibration source: Use vibration equipment that complies with ISO 5347-3 (secondary vibration calibration).
Fixture and mechanical tolerances:
- Steel fixture thickness ≥ three times the mounting-screw length, minimum 20 mm.
- Fixture surface roughness (arithmetical mean deviation) Ra

Overview

Key topics and requirements

Scope: Tests apply to pick-ups mounted by threaded fasteners; measures change in calibration factor with mounting torque.
Test range: Three torque points - one-half of the specified torque, the specified torque, and twice the specified torque.
Test environment: Room temperature maintained at 23 °C ± 3 °C.
Vibration source: Use vibration equipment that complies with ISO 5347-3 (secondary vibration calibration).
Fixture and mechanical tolerances:
- Steel fixture thickness ≥ three times the mounting-screw length, minimum 20 mm.
- Fixture surface roughness (arithmetical mean deviation) Ra

ISO 5347-16:1993 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Похожие стандарты

Abstract

Overview

Key topics and requirements

Похожие стандарты

Methods for the calibration of vibration and shock pick-ups — Part 3: Secondary vibration calibration

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines