ISO 6182-14:2019 PDF

Fire protection — Automatic nozzle systems — Part 14: Requirements and test methods for water spray nozzles

Название (английский):

ISO 6182-14:2019

Fire protection — Automatic nozzle systems — Part 14: Requirements and test methods for water spray nozzles

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 12
Дата публикации:: 4 февраля 2019 г.
Издание:: ISO IS 6182 edition 1 version 1
ICS:: 13.220.20

Тип поставки:

Full version180 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:180 €

Описание (английский):

This document specifies performance requirements, methods of test, and marking requirements for open water spray nozzles. This document is not applicable to open sprinklers or open water mist nozzles. Factors of installation, such as nozzle spacing, design densities, wind and hot gas velocities, are not intended to be addressed by this document.

Технические детали

Технический комитет: ISO/TC 21/SC 5 - Fixed firefighting systems using water
SKU: ISO 6182-14:2019

Abstract

Overview

ISO 6182-14:2019 - Fire protection - Automatic nozzle systems - Part 14 specifies performance requirements, test methods and marking for open water spray nozzles used in fire protection. It covers material, construction and functional tests for nozzles (not open sprinklers or water mist nozzles) and excludes installation design factors such as nozzle spacing, design densities, wind or hot gas velocities. The standard is part of the ISO 6182 series for fixed firefighting systems using water.

Key topics and requirements

Scope and definitions: Clarifies what constitutes an open water spray nozzle and distinguishes coated nozzles (factory-applied corrosion protection).
Materials and assembly: Nozzles must be made from corrosion‑resistant metallic materials (brass, bronze, stainless steel are accepted) and be designed so they cannot be readily adjusted, dismantled or reassembled.
Orifice and strainer rules:
- A 5 mm diameter sphere must pass through each water passage unless protected by a strainer.
- If orifices

Overview

Key topics and requirements

Scope and definitions: Clarifies what constitutes an open water spray nozzle and distinguishes coated nozzles (factory-applied corrosion protection).
Materials and assembly: Nozzles must be made from corrosion‑resistant metallic materials (brass, bronze, stainless steel are accepted) and be designed so they cannot be readily adjusted, dismantled or reassembled.
Orifice and strainer rules:
- A 5 mm diameter sphere must pass through each water passage unless protected by a strainer.
- If orifices

ISO 6182-14:2019 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Похожие стандарты

Abstract

Overview

Key topics and requirements

Похожие стандарты

Fire protection - Automatic sprinkler systems - Part 2: Requirements and test methods for sprinkler system al…

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines