ISO 6468:1996 PDF

Water quality — Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes — Gas chromatographic method after liquid-liquid extraction

Название (английский):

ISO 6468:1996

Water quality — Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes — Gas chromatographic method after liquid-liquid extraction

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 24
Дата публикации:: 5 декабря 1996 г.
Издание:: ISO IS 6468 edition 1 version 1
ICS:: 13.060.50

Тип поставки:

Full version360 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:360 €

Описание (английский):

Describes a method for determining certain organochlorine insecticides, polychlorinated biphenyls (PCBs) and chlorobenzenes (except the mono- and dichlorobenzenes) in drinking water, ground water, surface waters and waste waters. The method is applicable to samples containing up to 0,05 g/l of suspended solids.

Технические детали

Технический комитет: ISO/TC 147/SC 2 - Physical, chemical and biochemical methods
SKU: ISO 6468:1996

Abstract

Overview

ISO 6468:1996 specifies a laboratory method for the determination of certain organochlorine insecticides, polychlorinated biphenyls (PCBs) and chlorobenzenes (excluding mono‑ and dichlorobenzenes) in drinking water, groundwater, surface water and wastewater. The procedure uses liquid–liquid extraction followed by gas chromatography (GC) with an electron‑capture detector (ECD). It is intended for samples containing up to 0.05 g/L suspended solids and is aimed at environmental monitoring where very low concentrations are expected.

Key topics and technical requirements

Scope and limits: Applicable to specified organochlorine compounds; results report specific PCB congeners (not total PCBs). Typical method detection limits reported in the standard range approximately 1–50 ng/L, depending on the compound.
Sample handling: Collect samples in cleaned brown glass bottles, store in the dark at about 4 °C, adjust pH to 5–7 where required; special handling (acidic preservation) for sensitive compounds such as endosulfan.
Extraction: Liquid–liquid extraction performed in the sample container (or with stirring and microseparator), using extraction solvents such as hexane, petroleum ether or heptane. Example extraction volumes: initial 30 mL followed by 20–30 mL extractions.
Clean‑up and concentration: Drying with anhydrous sodium sulfate, optional freeze‑thaw steps, and column clean‑ups using alumina, alumina/silver nitrate, or silica gel as described. Concentration performed using evaporators (e.g., Kuderna‑Danish).
Instrumentation: GC with ECD suitable for capillary columns (25–60 m length,

Overview

Key topics and technical requirements

Scope and limits: Applicable to specified organochlorine compounds; results report specific PCB congeners (not total PCBs). Typical method detection limits reported in the standard range approximately 1–50 ng/L, depending on the compound.
Sample handling: Collect samples in cleaned brown glass bottles, store in the dark at about 4 °C, adjust pH to 5–7 where required; special handling (acidic preservation) for sensitive compounds such as endosulfan.
Extraction: Liquid–liquid extraction performed in the sample container (or with stirring and microseparator), using extraction solvents such as hexane, petroleum ether or heptane. Example extraction volumes: initial 30 mL followed by 20–30 mL extractions.
Clean‑up and concentration: Drying with anhydrous sodium sulfate, optional freeze‑thaw steps, and column clean‑ups using alumina, alumina/silver nitrate, or silica gel as described. Concentration performed using evaporators (e.g., Kuderna‑Danish).
Instrumentation: GC with ECD suitable for capillary columns (25–60 m length,

ISO 6468:1996 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts