ISO 6778:1984 PDF

Water quality — Determination of ammonium — Potentiometric method

Название (английский):

ISO 6778:1984

Water quality — Determination of ammonium — Potentiometric method

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 5
Дата публикации:: 1 мая 1984 г.
Издание:: ISO IS 6778 edition 1 version 1
ICS:: 13.060.50

Тип поставки:

Full version75 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:75 €

Описание (английский):

Specifies a procedure using an ammonia-sensing membrane probe for raw and waste water and sewage. The procedure is applicable to ammonium nitrogen concentration of up to 50 mg/l.The limit of detection is defined as the limit of Nernstian response under the conditions specified and has a value corresponding to approximately 0,2 mg/l.

Технические детали

Технический комитет: ISO/TC 147/SC 2 - Physical, chemical and biochemical methods
SKU: ISO 6778:1984

Abstract

Overview

ISO 6778:1984 specifies a potentiometric method for the determination of ammonium in raw water, sewage and wastewater using an ammonia‑sensing membrane probe (ammonia ion‑selective electrode). The procedure covers routine laboratory measurement up to 50 mg N/l (as ammonium nitrogen) without dilution and defines the limit of detection as the Nernstian response limit - approximately 0.2 mg N/l under the prescribed conditions. The method converts ammonium to ammonia by alkaline treatment and measures the electrode potential according to the Nernst equation.

Key topics and technical requirements

Measuring principle: ammonia-permeable membrane electrode measures partial pressure of ammonia after converting NH4+ to NH3 at pH ~12 (alkaline buffer with NaOH + EDTA).
Range and detection: applicable up to 50 mg N/l; detection limit ~0.2 mg N/l (Nernstian limit).
Nernstian response / slope: electrode potential varies about ~58.5 ± 2 mV per decade change in ammonium concentration at normal lab temperature.
Calibration and standards: use chloride‑based ammonium standards (e.g., 1000 mg N/l and 100 mg N/l stock solutions) to prepare calibration points bracketing expected sample concentrations.
Instrumentation: ammonia membrane probe (ion‑selective electrode), potentiometer with 0.2 mV precision, magnetic stirrer and 100 ml conical flasks.
Sample handling: analyze promptly or store at 2–5 °C; optional acidification (pH

Overview

Key topics and technical requirements

Measuring principle: ammonia-permeable membrane electrode measures partial pressure of ammonia after converting NH4+ to NH3 at pH ~12 (alkaline buffer with NaOH + EDTA).
Range and detection: applicable up to 50 mg N/l; detection limit ~0.2 mg N/l (Nernstian limit).
Nernstian response / slope: electrode potential varies about ~58.5 ± 2 mV per decade change in ammonium concentration at normal lab temperature.
Calibration and standards: use chloride‑based ammonium standards (e.g., 1000 mg N/l and 100 mg N/l stock solutions) to prepare calibration points bracketing expected sample concentrations.
Instrumentation: ammonia membrane probe (ion‑selective electrode), potentiometer with 0.2 mV precision, magnetic stirrer and 100 ml conical flasks.
Sample handling: analyze promptly or store at 2–5 °C; optional acidification (pH

ISO 6778:1984 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts