ISO 6780:2003 PDF

Flat pallets for intercontinental materials handling — Principal dimensions and tolerances

Название (английский):

ISO 6780:2003

Flat pallets for intercontinental materials handling — Principal dimensions and tolerances

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 13
Дата публикации:: 25 ноября 2003 г.
Издание:: ISO IS 6780 edition 2 version 1
ICS:: 55.180.20

Тип поставки:

Full version195 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:195 €

Описание (английский):

ISO 6780:2003 specifies the principal dimensions and tolerances for new single-deck and double-deck, reversible and non-reversible flat pallets, of all entry types and made of any material, related to their transportation and handling by pallet trucks, fork-lift trucks and other appropriate equipment. The requirements for features such as openings, clearances, chamfers and wings that are required for efficient handling are also included. The applicability of ISO 6780:2003 to reversible pallets can be affected by their use in field conditions.

Технические детали

Технический комитет: ISO/TC 51 - Pallets for unit load method of materials handling
SKU: ISO 6780:2003

Abstract

Overview

ISO 6780:2003 specifies the principal dimensions and tolerances for flat pallets used in intercontinental materials handling. It applies to new single‑deck and double‑deck, reversible and non‑reversible pallets of any material and all entry types, defining the sizes, clearances and construction features required for safe and efficient handling by pallet trucks, fork‑lift trucks and other equipment. The standard promotes interoperability and distribution efficiency by encouraging a limited set of internationally recognized pallet sizes.

Key topics and technical requirements

Approved pallet sizes (plan dimensions):
- Rectangular: 1200 × 800 mm, 1200 × 1000 mm, 1219 × 1016 mm
- Square: 1067 × 1067 mm, 1100 × 1100 mm, 1140 × 1140 mm
Manufacturing tolerances on plan dimensions: +3 / −6 mm.
Vertical clearances (H) under the top deck:
- Pallet trucks: High 100 mm; Standard 95 mm; Low 89 mm (maximum H to bottom surface 156 mm)
- Fork‑lift trucks: minimum 50 mm (some countries require 55 mm)
- Automatic handling systems: recommended 100 mm
Horizontal clearances for end/side entries and openings: defined via tables and diagrams (normative Annex B) to ensure fork arm compatibility.
Bottom deck chamfers: chamfer face 40° ± 5°, vertical face height ≤ 16 mm, max distance to deck separators 65 mm.
Deck projections: projections

Overview

Key topics and technical requirements

Approved pallet sizes (plan dimensions):
- Rectangular: 1200 × 800 mm, 1200 × 1000 mm, 1219 × 1016 mm
- Square: 1067 × 1067 mm, 1100 × 1100 mm, 1140 × 1140 mm
Manufacturing tolerances on plan dimensions: +3 / −6 mm.
Vertical clearances (H) under the top deck:
- Pallet trucks: High 100 mm; Standard 95 mm; Low 89 mm (maximum H to bottom surface 156 mm)
- Fork‑lift trucks: minimum 50 mm (some countries require 55 mm)
- Automatic handling systems: recommended 100 mm
Horizontal clearances for end/side entries and openings: defined via tables and diagrams (normative Annex B) to ensure fork arm compatibility.
Bottom deck chamfers: chamfer face 40° ± 5°, vertical face height ≤ 16 mm, max distance to deck separators 65 mm.
Deck projections: projections

ISO 6780:2003 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts