ISO 7289:2018 PDF

Gas welding equipment — Quick-action couplings with shut-off valves for welding, cutting and allied processes

Название (английский):

ISO 7289:2018

Gas welding equipment — Quick-action couplings with shut-off valves for welding, cutting and allied processes

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 13 декабря 2018 г.
Издание:: ISO IS 7289 edition 4 version 1
ICS:: 25.160.30

Тип поставки:

Full version150 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:150 €

Описание (английский):

This document defines the specifications and the type tests for quick-action couplings with shut-off valves. It applies to quick-action couplings used between the regulator and the torch in equipment for gas welding, cutting and allied processes. This document applies to cases where these couplings are used with hoses in accordance with ISO 3821 or threaded unions in accordance with ISO/TR 28821.

Технические детали

Технический комитет: ISO/TC 44/SC 8 - Equipment for gas welding, cutting and allied processes
SKU: ISO 7289:2018

Abstract

Overview

ISO 7289:2018 specifies requirements and type tests for quick-action couplings with shut-off valves used in gas welding, cutting and allied processes. The standard covers couplings installed between the regulator and the torch (with hoses conforming to ISO 3821 or threaded unions per ISO/TR 28821) and defines design, installation, material and performance requirements so coupling/uncoupling can be performed safely while equipment remains pressurized.

Key topics and technical requirements

Scope and application: Applies to couplings used between regulator and torch for gas welding, cutting and allied processes.
Coupling types: Three gas-specific types defined - Type O (oxygen), Type F (fuel gas) and Type N (other welding gases) - to prevent accidental interchange.
Dimensions and interchangeability: Standardizes critical dimensions (including a minimum length for the internal diameter) so that elements of different gas types are non-interchangeable while couplings of the same type remain interchangeable across manufacturers.
Shut-off configuration: The shut-off device must be located in the female element; gas-tight sealing is provided on the cylindrical shaft surface.
Materials and hardness: Materials must meet ISO 9539 requirements. Male elements must be from uncoated material with a surface hardness ≥ 270 HV10 (higher surface-hardness criteria apply for certain coated materials).
Performance / working requirements:
- Designed for a maximum working pressure of 2 MPa (20 bar).
- Type-testing includes pressure-resistance (test pressures up to 4 MPa and 6 MPa specified), gas tightness, pressure drop, flashback resistance, tensile and radial load resistance, and endurance.
Coupling/uncoupling: Must be operable without tools, resist accidental disengagement (e.g., not by simple rotation or by longitudinal traction

Overview

Key topics and technical requirements

Scope and application: Applies to couplings used between regulator and torch for gas welding, cutting and allied processes.
Coupling types: Three gas-specific types defined - Type O (oxygen), Type F (fuel gas) and Type N (other welding gases) - to prevent accidental interchange.
Dimensions and interchangeability: Standardizes critical dimensions (including a minimum length for the internal diameter) so that elements of different gas types are non-interchangeable while couplings of the same type remain interchangeable across manufacturers.
Shut-off configuration: The shut-off device must be located in the female element; gas-tight sealing is provided on the cylindrical shaft surface.
Materials and hardness: Materials must meet ISO 9539 requirements. Male elements must be from uncoated material with a surface hardness ≥ 270 HV10 (higher surface-hardness criteria apply for certain coated materials).
Performance / working requirements:
- Designed for a maximum working pressure of 2 MPa (20 bar).
- Type-testing includes pressure-resistance (test pressures up to 4 MPa and 6 MPa specified), gas tightness, pressure drop, flashback resistance, tensile and radial load resistance, and endurance.
Coupling/uncoupling: Must be operable without tools, resist accidental disengagement (e.g., not by simple rotation or by longitudinal traction

ISO 7289:2018 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Gas welding equipment. Rubber hoses for welding, cutting and allied processes.

Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes. Listing of c…

Gas welding equipment — Materials for equipment used in gas welding, cutting and allied processes — Amendment…