Overview

ISO 7493:2006 - "Dentistry - Operator's stool" specifies requirements, recommendations and test methods for operator stools used in dental offices. The standard covers design guidance, safety and performance criteria, testing procedures, marking, packaging and the manufacturer’s instructions for use. The term dental operator includes dentists, dental assistants and dental hygienists.

Key topics and technical requirements

General construction
- Seat must be height-adjustable and swivel freely around the vertical axis.
- Upper part must not be removable from the base without tools.
- Backrest is recommended and should be adjustable independently of seat height.
- Five castors arranged pentagonally are recommended.
Dimensions and adjustments
- Manufacturer must supply lowest and highest seat heights and the range of adjustment, plus seat width and depth and backrest range.
Performance and tests
- Load-carrying capacity: Apply 1 350 N to the seat; height change shall not exceed 10 mm (test 6.4).
- Stability: Stool must not tip under a 600 N downward force plus 20 N horizontal (test 6.5).
- Backrest deflection: Under 250 N horizontal load, deflection at reference point B must not exceed 30 mm (test 6.6).
- Armrest/torso support strength: Specific vertical and horizontal forces are applied (tests 6.7).
- Cleaning & disinfection: Surfaces must withstand recommended agents; testing per ISO 21530 (test 6.8).
- Flammability: Upholstery/padding tested to ISO 8191‑1; charring limited to 30 mm from ignition source.
Sampling
- Type tests use one representative stool sample.
Marking, packaging and instructions
- Manufacturer name/trademark, model and serial number required.
- Instructions must include safe operation, maintenance, controls and cleaning/disinfection recommendations.

Practical applications and users

Who uses ISO 7493:2006:

Manufacturers and designers of dental operator stools - to meet safety, ergonomic and testing requirements.
Dental clinics and procurement teams - to specify compliant stools that promote operator comfort and patient safety.
Regulatory bodies and conformity assessors - to verify type test results and marking/packaging compliance.
Ergonomists and dental equipment planners - to apply recommended ergonomic principles in workspace design.

Benefits:

Ensures ergonomic support to reduce musculoskeletal strain.
Standardizes safety and durability testing for purchase and certification decisions.
Guides cleaning/disinfection resilience for infection-control protocols.

Related standards

ISO 21530 (surface resistance to chemical disinfectants)
ISO 8191‑1 (flammability of upholstery)
ISO 9687 (graphical symbols)
ISO 1942 (dental vocabulary)
Ergonomics references: ISO 6385 and ISO 11226 (recommended in Annex A)

Keywords: ISO 7493:2006, operator's stool, dental stool, dental operator, ergonomics, dental equipment, stability testing, load-carrying capacity, cleaning and disinfection.

Overview

Key topics and technical requirements

General construction
- Seat must be height-adjustable and swivel freely around the vertical axis.
- Upper part must not be removable from the base without tools.
- Backrest is recommended and should be adjustable independently of seat height.
- Five castors arranged pentagonally are recommended.
Dimensions and adjustments
- Manufacturer must supply lowest and highest seat heights and the range of adjustment, plus seat width and depth and backrest range.
Performance and tests
- Load-carrying capacity: Apply 1 350 N to the seat; height change shall not exceed 10 mm (test 6.4).
- Stability: Stool must not tip under a 600 N downward force plus 20 N horizontal (test 6.5).
- Backrest deflection: Under 250 N horizontal load, deflection at reference point B must not exceed 30 mm (test 6.6).
- Armrest/torso support strength: Specific vertical and horizontal forces are applied (tests 6.7).
- Cleaning & disinfection: Surfaces must withstand recommended agents; testing per ISO 21530 (test 6.8).
- Flammability: Upholstery/padding tested to ISO 8191‑1; charring limited to 30 mm from ignition source.
Sampling
- Type tests use one representative stool sample.
Marking, packaging and instructions
- Manufacturer name/trademark, model and serial number required.
- Instructions must include safe operation, maintenance, controls and cleaning/disinfection recommendations.

Practical applications and users

Who uses ISO 7493:2006:

Manufacturers and designers of dental operator stools - to meet safety, ergonomic and testing requirements.
Dental clinics and procurement teams - to specify compliant stools that promote operator comfort and patient safety.
Regulatory bodies and conformity assessors - to verify type test results and marking/packaging compliance.
Ergonomists and dental equipment planners - to apply recommended ergonomic principles in workspace design.

Benefits:

Ensures ergonomic support to reduce musculoskeletal strain.
Standardizes safety and durability testing for purchase and certification decisions.
Guides cleaning/disinfection resilience for infection-control protocols.

Related standards

ISO 21530 (surface resistance to chemical disinfectants)
ISO 8191‑1 (flammability of upholstery)
ISO 9687 (graphical symbols)
ISO 1942 (dental vocabulary)
Ergonomics references: ISO 6385 and ISO 11226 (recommended in Annex A)

Keywords: ISO 7493:2006, operator's stool, dental stool, dental operator, ergonomics, dental equipment, stability testing, load-carrying capacity, cleaning and disinfection.

ISO 7493:2006 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Похожие стандарты

Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfecta…

Furniture — Assessment of the ignitability of upholstered furniture — Part 1: Ignition source: smouldering ci…

Dentistry — Graphical symbols for dental equipment — Amendment 1

Structures for mine shafts. Sinking stages.

Ergonomics principles in the design of work systems (ISO 6385:2016)

Ergonomics. Application document for International Standards on manual handling (ISO 11228-1, ISO 11228-2 and…