ISO 8144-2:1995 PDF

Thermal insulation — Mineral wool mats for ventilated roof spaces — Part 2: Specification for horizontal applications with unrestricted ventilation

Название (английский):

ISO 8144-2:1995

Thermal insulation — Mineral wool mats for ventilated roof spaces — Part 2: Specification for horizontal applications with unrestricted ventilation

Статус документа:: Отменён
Формат:: Электронный (PDF)
Количество страниц:: 9
Дата публикации:: 19 октября 1995 г.
Издание:: ISO IS 8144 edition 1 version 1
ICS:: 91.100.60

Тип поставки:

Full version135 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:135 €

Описание (английский):

Specifies the properties and acceptance tolerances for bonded mineral wool thermal insulating mats. The mats specified are only intended to be used for horizontal applications with unrestricted ventilation and are not designed to support any applied load.

Технические детали

Технический комитет: ISO/TC 163/SC 3 - Thermal insulation products, components and systems
SKU: ISO 8144-2:1995

Abstract

Overview

ISO 8144-2:1995 specifies requirements for bonded mineral wool thermal insulating mats (batts and rolls) intended for horizontal applications in ventilated roof spaces with unrestricted ventilation. The standard defines product properties, acceptance tolerances, testing and marking information. These mats are not designed to support imposed loads and are intended to preserve the ventilation path in roof construction.

Key topics and requirements

Scope and intended use
- Applies only to mineral wool mats for horizontal roof applications where any excess thickness will not restrict the ventilated air space.
- Mats are not load-bearing; only mechanical properties needed for handling are specified.
Dimensional tolerances
- Width: +2% or +10 mm, whichever is less (measured on averages).
- Thickness: average tolerance −5% / +25%; individual measurement points must not deviate more than 15 mm from specimen mean.
- Squareness: for every 100 mm along the shortest face, max deviation 1 mm.
- Length: negative tolerance −2% with specified allowances on average measured values.
Thermal resistance (R-value)
- Manufacturer declares R-value and mean test temperature.
- Measured R must be at least 95% of the declared value.
- Test methods: ISO 8301 (heat flow meter) or ISO 8302 (guarded hot plate). In dispute, ISO 8302 is authoritative.
- Test conditions: mean test temperature typically 23 °C or 10 °C (40 °C may be agreed in tropical regions); temperature difference ≥ 20 °C.
Specimen preparation and conditioning
- Specimens oven-dried or conditioned at 23 °C ±2 °C and RH

Overview

Key topics and requirements

Scope and intended use
- Applies only to mineral wool mats for horizontal roof applications where any excess thickness will not restrict the ventilated air space.
- Mats are not load-bearing; only mechanical properties needed for handling are specified.
Dimensional tolerances
- Width: +2% or +10 mm, whichever is less (measured on averages).
- Thickness: average tolerance −5% / +25%; individual measurement points must not deviate more than 15 mm from specimen mean.
- Squareness: for every 100 mm along the shortest face, max deviation 1 mm.
- Length: negative tolerance −2% with specified allowances on average measured values.
Thermal resistance (R-value)
- Manufacturer declares R-value and mean test temperature.
- Measured R must be at least 95% of the declared value.
- Test methods: ISO 8301 (heat flow meter) or ISO 8302 (guarded hot plate). In dispute, ISO 8302 is authoritative.
- Test conditions: mean test temperature typically 23 °C or 10 °C (40 °C may be agreed in tropical regions); temperature difference ≥ 20 °C.
Specimen preparation and conditioning
- Specimens oven-dried or conditioned at 23 °C ±2 °C and RH

ISO 8144-2:1995 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Похожие стандарты

Abstract

Overview

Key topics and requirements

Похожие стандарты

Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat flow mete…

Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Guarded hot…

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies