ISO 8715:2001 PDF

Electric road vehicles — Road operating characteristics

Название (английский):

ISO 8715:2001

Electric road vehicles — Road operating characteristics

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 17
Дата публикации:: 28 июня 2001 г.
Издание:: ISO IS 8715 edition 1 version 1
ICS:: 43.120

Тип поставки:

Full version255 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:255 €

Описание (английский):

This International Standard specifies the procedures for measuring the road performance of purely electrically propelled passenger cars and commercial vehicles of a maximum authorized total mass of 3 500 kg1_. The road performance comprises road operating characteristics such as speed, acceleration and hill climbing ability.

Технические детали

Технический комитет: ISO/TC 22/SC 37 - Electrically propelled vehicles
SKU: ISO 8715:2001

Abstract

Overview

ISO 8715:2001 - Electric road vehicles - Road operating characteristics defines standardized procedures to measure the road performance of purely electric passenger cars and light commercial vehicles (maximum authorized total mass 3 500 kg). The standard specifies how to evaluate road operating characteristics such as maximum speed, maximum 30‑minute speed, acceleration, hill climbing ability and hill starting ability, and includes provisions for chassis dynamometer calibration (Annex A).

Key topics

Scope and vehicle class: Applies to electrically propelled vehicles in categories M1 and N1 up to 3 500 kg.
Test sequence: Organized to be completed in two days - preconditioning and maximum 30‑minute speed (day 1), then maximum speed, partial battery discharge, acceleration runs, uphill speed, and hill start tests (day 2).
Battery preconditioning and charging: Specifies overnight charging procedure, end‑of‑charge criteria (standard 12 h or formula based on battery kWh and mains power), and required state‑of‑charge windows for specific tests.
Parameters, units and accuracy: Defines measurement parameters and tolerances (examples: time resolution 0.1 s; length accuracy 1 m; speed resolution/accuracy such as 0.2 km/h or ±1%/0.1 km/h; mass 1 kg or ±0.5%).
Test and environmental conditions: Track and atmospheric limits (outdoor ambient 5–32 °C; indoor 20–30 °C; air pressure 91–104 kPa; average wind

Overview

Key topics

Scope and vehicle class: Applies to electrically propelled vehicles in categories M1 and N1 up to 3 500 kg.
Test sequence: Organized to be completed in two days - preconditioning and maximum 30‑minute speed (day 1), then maximum speed, partial battery discharge, acceleration runs, uphill speed, and hill start tests (day 2).
Battery preconditioning and charging: Specifies overnight charging procedure, end‑of‑charge criteria (standard 12 h or formula based on battery kWh and mains power), and required state‑of‑charge windows for specific tests.
Parameters, units and accuracy: Defines measurement parameters and tolerances (examples: time resolution 0.1 s; length accuracy 1 m; speed resolution/accuracy such as 0.2 km/h or ±1%/0.1 km/h; mass 1 kg or ±0.5%).
Test and environmental conditions: Track and atmospheric limits (outdoor ambient 5–32 °C; indoor 20–30 °C; air pressure 91–104 kPa; average wind

ISO 8715:2001 PDF

Технические детали

Abstract

Overview

Key topics

Похожие стандарты

Abstract

Overview

Key topics

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts