Overview
ISO 9448-4:2013 - Tools for pressing - Guide bushes - Part 4: Form C, gliding bushes, headed, type 1 specifies the standard geometry, tolerances and designation rules for headed gliding guide bushes (form C, type 1) used in press tools. It defines main dimensions (in millimetres), mounting method (in the clamp plate with a transition fit, fixed by screws), material guidance and required hardness. The document ensures interchangeability, correct assembly and consistent procurement of guide bushes for die sets.
Key topics and technical requirements
- Dimensions and tolerances: Main guiding diameters, bush lengths and related dimensions are defined (see Figure 1 and Table 1 of the standard). Nominal guiding diameters covered include typical sizes such as 16, 20, 25, 32, 40 and 50 mm.
- Mounting details: Designed to be mounted in the clamp plate with a transition fit and secured by screws. Clearance holes and screw sizes are addressed in the dimensional table.
- Materials and hardness: Material selection is left to the manufacturer’s discretion, but hardness is specified as 60 HRC (Rockwell C) - test method per ISO 6508-1.
- Design freedoms: Details not explicitly stated (chamfers, radii, lubrication grooves, surface roughness specifics) are left to the manufacturer’s discretion.
- Designation rules: A guide bush is designated by:
- “Guide bush”
- reference to ISO 9448-4
- form (C)
- guiding diameter D (mm)
- length l (mm)
Example: Guide bush ISO 9448-4 C - 16 × 25
- Anti-misassembly guidance: The standard recommends certain D1 values (for example 15, 19, 24, 30, 38 and 48 mm) to help prevent incorrect assembly of upper and lower plates.
Applications and who uses ISO 9448-4:2013
- Press-tool designers and toolmakers specifying and designing die sets and guide systems.
- Die manufacturers and stamping shops requiring standardized headed gliding bushes for repeatable alignments.
- Procurement and quality engineers ensuring incoming parts meet dimensional and hardness requirements for interchangeability.
- Maintenance teams and spare-part suppliers who need consistent designation and replacement sizing for headed gliding bushes.
Practical benefits include improved interchangeability, reduced assembly errors, clearer supplier specifications, and predictable wear performance due to specified hardness.
Related standards
- Other parts of ISO 9448 (Parts 1–11): forms and types for plain, flanged, stepped and ball-cage bushes (e.g., ISO 9448-1, ISO 9448-2, ISO 9448-3, etc.).
- ISO 6508-1: Metallic materials - Rockwell hardness test - Part 1: Test method (referenced for hardness verification).
Keywords: ISO 9448-4:2013, guide bushes, headed gliding bushes, press tools, dimensions and tolerances, 60 HRC, guide bush designation, clamp plate, transition fit.