ISO 9895:2008 PDF

Paper and board — Compressive strength — Short-span test

Название (английский):

ISO 9895:2008

Paper and board — Compressive strength — Short-span test

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 16 октября 2008 г.
Издание:: ISO IS 9895 edition 2 version 1
ICS:: 85.060

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

ISO 9895:2008 specifies a method for determining the compressive strength in the machine and cross-directions of paper and board using a short-span compressive tester. It is intended for papers and boards used for the manufacture of containers and boxes. ISO 9895:2008 is recommended for papers and boards with a grammage from 100 g/m2 to 400 g/m2.

Технические детали

Технический комитет: ISO/TC 6/SC 2 - Test methods and quality specifications for paper and board
SKU: ISO 9895:2008

Abstract

Overview

ISO 9895:2008 - Paper and board - Compressive strength - Short-span test specifies a standardized laboratory method for measuring the edgewise (short-span) compressive strength of paper and board used in container and box manufacture. The method uses a short-span compressive tester to determine compressive strength in both the machine direction (MD) and cross direction (CD). ISO 9895:2008 is recommended for papers and boards with a grammage of 100–400 g/m².

Key Topics and Requirements

Test principle: A 15 mm wide strip is clamped across a 0.70 mm ± 0.05 mm free span and the clamps are driven together until compressive failure. The maximum force is recorded.
Apparatus:
- Short-span compressive tester with two clamps 30 mm long and high-friction surfaces.
- Constant clamping force of 2300 N ± 500 N.
- Test speed 3 mm/min ± 1 mm/min.
- Load measurement accurate to ±1% over 10–100% of full scale; device to check clamping force and allow calibration.
Specimens and conditioning:
- Test pieces: strips ≥70 mm long, 15.0 mm ± 0.1 mm wide.
- Cut and condition according to ISO 186 and ISO 187; grammage per ISO 536 if required.
- At least 20 determinations per direction to reduce local variation effects.
Calculations:
- Compressive strength (σC) = mean maximum force (F) / initial width (b) - reported in kN/m to three significant figures.
- Compressive index = (1000 × σC) / grammage (g) - reported in kN·m/kg.
Precision:
- Typical single-lab coefficient of variation

Overview

Key Topics and Requirements

Test principle: A 15 mm wide strip is clamped across a 0.70 mm ± 0.05 mm free span and the clamps are driven together until compressive failure. The maximum force is recorded.
Apparatus:
- Short-span compressive tester with two clamps 30 mm long and high-friction surfaces.
- Constant clamping force of 2300 N ± 500 N.
- Test speed 3 mm/min ± 1 mm/min.
- Load measurement accurate to ±1% over 10–100% of full scale; device to check clamping force and allow calibration.
Specimens and conditioning:
- Test pieces: strips ≥70 mm long, 15.0 mm ± 0.1 mm wide.
- Cut and condition according to ISO 186 and ISO 187; grammage per ISO 536 if required.
- At least 20 determinations per direction to reduce local variation effects.
Calculations:
- Compressive strength (σC) = mean maximum force (F) / initial width (b) - reported in kN/m to three significant figures.
- Compressive index = (1000 × σC) / grammage (g) - reported in kN·m/kg.
Precision:
- Typical single-lab coefficient of variation

ISO 9895:2008 PDF

Технические детали

Abstract

Overview

Key Topics and Requirements

Похожие стандарты

Abstract

Overview

Key Topics and Requirements

Похожие стандарты

Fibre ropes for offshore stationkeeping. General specification.

Anodizing of aluminium and its alloys. Method to test the surface abrasion resistance using glass-coated abra…

Anaesthetic and respiratory equipment - Tracheal tubes and connectors - Amendment 1: Reinstatement of third e…