ISO 9931:1991 PDF

Coal — Sampling of pulverized coal conveyed by gases in direct fired coal systems

Название (английский):

ISO 9931:1991

Coal — Sampling of pulverized coal conveyed by gases in direct fired coal systems

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 18
Дата публикации:: 16 декабря 1991 г.
Издание:: ISO IS 9931 edition 1 version 1
ICS:: 73.040

Тип поставки:

Full version270 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:270 €

Описание (английский):

Specifies a method which, subject to limitations imposed by the geometry of the pulverized-coal pipe, is applicable to multipoint sampling. Annexes A, B and C are for information only.

Технические детали

Технический комитет: ISO/TC 27/SC 4 - Sampling
SKU: ISO 9931:1991

Abstract

Overview - ISO 9931:1991 (Coal pulverized-coal sampling)

ISO 9931:1991 specifies a standardized multipoint sampling method for pulverized coal conveyed by air or other gases in circular pipes of direct-fired coal systems. It defines the mechanical sampler, auxiliary equipment (dustless connection, cyclone, Venturi or ejector), sampling positions and procedures used to derive both the mass distribution of coal to burners and the particle-size distribution for pulverizer performance evaluation. Annexes A–C are informative.

Key topics and technical requirements

Multipoint sampler design: a four-tip rotating sampler that samples 64 equally sized areas of a pipe cross-section (16 angular positions × 4 tips). The sampler head is aligned with the pipe axis and uses exchangeable tips.
Pipe geometry limits: intended for circular pipes with internal diameters typically between 250 mm and 700 mm; sampling is subject to geometric constraints of the pipe and socket.
Particle-size restriction: maximum particle size should be less than one‑third of the sampler tip aperture (document example:

Overview - ISO 9931:1991 (Coal pulverized-coal sampling)

Key topics and technical requirements

Multipoint sampler design: a four-tip rotating sampler that samples 64 equally sized areas of a pipe cross-section (16 angular positions × 4 tips). The sampler head is aligned with the pipe axis and uses exchangeable tips.
Pipe geometry limits: intended for circular pipes with internal diameters typically between 250 mm and 700 mm; sampling is subject to geometric constraints of the pipe and socket.
Particle-size restriction: maximum particle size should be less than one‑third of the sampler tip aperture (document example:

ISO 9931:1991 PDF

Технические детали

Abstract

Overview - ISO 9931:1991 (Coal pulverized-coal sampling)

Key topics and technical requirements

Похожие стандарты

Abstract

Overview - ISO 9931:1991 (Coal pulverized-coal sampling)

Key topics and technical requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts