Overview
ISO/IEC 18046-5:2025 - Information technology - Radio frequency identification device performance test methods - Part 5 - specifies standardized environmental test methods for RFID tags used in sporting goods. The standard defines how to identify typical indoor and outdoor sporting environments, select environmental stresses, and measure tag performance change after exposure. It covers RFID-only tags and items that include optional advanced electronics (e.g., sensors), and is intended for use across the product lifecycle from manufacturing and distribution to consumer use.
Keywords: ISO/IEC 18046-5:2025, RFID, sporting goods, environmental test methods, tag performance, performance degradation, testing methods
Key Topics and Requirements
- Purpose: Establish repeatable methods to measure and evaluate performance changes of RFID tags after environmental exposure.
- Test scope: Indoor and outdoor sports equipment, apparel, footwear, accessories and other sporting goods with embedded RFID.
- Test item forms: DUTs (devices under test) prepared both with tag attached to the sporting good and as the tag alone; some dynamic tests (shock/drop) must be performed with the tag attached.
- Sampling: 10 tags sampled as the principle lot (typically 5 attached + 5 unattached) plus 3 additional spare items for accidental damage replacement.
- Standard atmospheric conditions: Tests and measurements are performed under 15–35 °C, 25–75 % RH, 86–106 kPa unless a test specifies otherwise (per IEC 60068-1).
- Test composition:
- Performance tests (pre-test baseline measurement of tag sensitivity and other performance parameters).
- Environmental tests (exposure to climatic, mechanical, chemical and biological conditions encountered in use and transport).
- Evaluation metrics: performance change rate (PCR), performance degradation percentage (PDP) and related calculations to quantify post-test performance.
- Reference test methods: Aligns and references established environmental and EMC tests such as IEC 60068 series (cold, dry heat, damp heat, salt mist, shock, vibration) and IEC 61000-4-2 (ESD immunity).
Practical Applications - Who Uses This Standard
- Manufacturers and OEMs of sporting goods to validate RFID tag durability and reliability claims.
- Quality assurance and test laboratories for certifying tags and embedded electronics under realistic use conditions.
- Retailers and distribution centers for assessing tag robustness in storage and transport.
- Product designers and R&D teams integrating RFID and sensor technologies in footwear, apparel, balls, racks and accessories.
- Sports-technology integrators and service providers who depend on accurate in-field RFID data for athlete monitoring, inventory management, contactless payments and equipment maintenance.
Related Standards (applicable)
This standard helps stakeholders ensure RFID-enabled sporting goods perform reliably through real-world environmental stresses, reducing field failures and improving lifecycle data quality.