ISO/IEC 18092:2023 PDF

Telecommunications and information exchange between systems — Near Field Communication Interface and Protocol 1 (NFCIP-1)

Название (английский):

ISO/IEC 18092:2023

Telecommunications and information exchange between systems — Near Field Communication Interface and Protocol 1 (NFCIP-1)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 46
Дата публикации:: 8 декабря 2023 г.
Издание:: ISO/IEC IS 18092 edition 3 version 1
ICS:: 35.100.10

Тип поставки:

Full version690 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:8 раб. дн. (перевод)

Цена:690 €

Описание (английский):

This document defines: — communication modes for Near Field Communication Interface and Protocol 1 (NFCIP-1) using inductive coupled devices operating at the centre frequency of 13,56 MHz for interconnection of computer peripherals; — both the active and the passive communication modes of NFCIP-1 to realize a communication network using Near Field Communication (NFC) devices for networked products and for consumer equipment; — a transport protocol including protocol activation and data exchange methods. This document specifies: — modulation schemes; — codings; — bit rates; — frame format of the radio frequency (RF) interface; — initialisation schemes and conditions required for data collision control during initialisation. Information interchange between systems is based on agreement between the interchange parties upon the interchange codes and the data structure.

Технические детали

Технический комитет: ISO/IEC JTC 1/SC 6 - Telecommunications and information exchange between systems
SKU: ISO/IEC 18092:2023

Abstract

Overview

ISO/IEC 18092:2023 - Near Field Communication Interface and Protocol 1 (NFCIP‑1) defines the interface and transport protocol for short‑range NFC communication using inductively coupled devices at a centre frequency of 13.56 MHz. The third edition updates and harmonizes NFCIP‑1 with NFC Forum digital protocol work and introduces support for NFC security features for the Target role. The standard supports both active and passive communication modes and defines how devices initialize, activate and exchange data over the RF interface.

Key technical topics and requirements

RF interface at 13.56 MHz: physical RF field parameters, detection and timing requirements.
Bit rates and timing: supported data rates are 106, 212 and 424 kbit/s (denoted f/128, f/64, f/32).
Modulation, coding and frame format: specified modulation schemes, coding rules and RF frame structure for reliable data transmission.
Active and passive communication modes: electrical and protocol differences for devices that generate an RF field (active) or are powered by the field (passive).
Initialization and anti‑collision: procedures and conditions for device discovery, initialisation, RF collision avoidance (RFCA) and Start‑of‑Device‑Detection (SDD).
Transport protocol and activation flow: commands and flows for Attribute, Wakeup, Parameter Selection, Data Exchange, chaining (more information), timeout extension and deactivation (Deselect/Release).
Interchange rules: information interchange relies on prior agreement between parties on interchange codes and data structures.
Conformance and annexes: CRC calculation (normative) and SAK information (informative).
Normative references: includes ISO/IEC 13157‑1 (NFC‑SEC), ISO/IEC 14443‑2/3 and ITU‑T V.41.

Practical applications

Enabling peer‑to‑peer NFC communications between smartphones, tablets and accessories.
Interconnection of computer peripherals and small consumer devices where short‑range, low‑power wireless links are required.
Implementing transport and activation flows for NFC‑enabled networked products and consumer electronics.
Basis for interoperability testing, firmware/firmware stack development and device certification.

Who should use this standard

NFC chipset and module designers, embedded firmware engineers and hardware designers.
Mobile OEMs, consumer electronics manufacturers and accessory vendors integrating NFC.
Standards engineers, interoperability test laboratories and security architects (refer to ISO/IEC 13157‑1 for NFC‑SEC).
Product teams implementing NFC transport, initialization and collision control logic.

Related standards

ISO/IEC 13157‑1 (NFC‑SEC), ISO/IEC 14443‑2 and ISO/IEC 14443‑3 (contactless proximity), ITU‑T V.41.
NFC Forum Digital Protocol and Activity Technical Specifications - harmonization targets for interoperability.

Keywords: ISO/IEC 18092:2023, NFCIP‑1, NFC, near field communication, 13.56 MHz, active mode, passive mode, modulation, bit rates, RF interface, initialization, transport protocol.

Overview

Key technical topics and requirements

RF interface at 13.56 MHz: physical RF field parameters, detection and timing requirements.
Bit rates and timing: supported data rates are 106, 212 and 424 kbit/s (denoted f/128, f/64, f/32).
Modulation, coding and frame format: specified modulation schemes, coding rules and RF frame structure for reliable data transmission.
Active and passive communication modes: electrical and protocol differences for devices that generate an RF field (active) or are powered by the field (passive).
Initialization and anti‑collision: procedures and conditions for device discovery, initialisation, RF collision avoidance (RFCA) and Start‑of‑Device‑Detection (SDD).
Transport protocol and activation flow: commands and flows for Attribute, Wakeup, Parameter Selection, Data Exchange, chaining (more information), timeout extension and deactivation (Deselect/Release).
Interchange rules: information interchange relies on prior agreement between parties on interchange codes and data structures.
Conformance and annexes: CRC calculation (normative) and SAK information (informative).
Normative references: includes ISO/IEC 13157‑1 (NFC‑SEC), ISO/IEC 14443‑2/3 and ITU‑T V.41.

Practical applications

Enabling peer‑to‑peer NFC communications between smartphones, tablets and accessories.
Interconnection of computer peripherals and small consumer devices where short‑range, low‑power wireless links are required.
Implementing transport and activation flows for NFC‑enabled networked products and consumer electronics.
Basis for interoperability testing, firmware/firmware stack development and device certification.

Who should use this standard

NFC chipset and module designers, embedded firmware engineers and hardware designers.
Mobile OEMs, consumer electronics manufacturers and accessory vendors integrating NFC.
Standards engineers, interoperability test laboratories and security architects (refer to ISO/IEC 13157‑1 for NFC‑SEC).
Product teams implementing NFC transport, initialization and collision control logic.

Related standards

ISO/IEC 13157‑1 (NFC‑SEC), ISO/IEC 14443‑2 and ISO/IEC 14443‑3 (contactless proximity), ITU‑T V.41.
NFC Forum Digital Protocol and Activity Technical Specifications - harmonization targets for interoperability.

Keywords: ISO/IEC 18092:2023, NFCIP‑1, NFC, near field communication, 13.56 MHz, active mode, passive mode, modulation, bit rates, RF interface, initialization, transport protocol.

ISO/IEC 18092:2023 PDF

Технические детали

Abstract

Overview

Key technical topics and requirements

Practical applications

Who should use this standard

Related standards

Похожие стандарты

Abstract

Overview

Key technical topics and requirements

Practical applications

Who should use this standard

Related standards

Похожие стандарты

Information technology — Telecommunications and information exchange between systems — NFC Security — Part 1:…

Cards and security devices for personal identification — Contactless proximity objects — Part 2: Radio freque…

Cards and security devices for personal identification — Contactless proximity objects — Part 3: Initializati…