ISO/IEC 19823-16:2020 PDF

Information technology — Conformance test methods for security service crypto suites — Part 16: Crypto suite ECDSA-ECDH security services for air interface communications

Название (английский):

ISO/IEC 19823-16:2020

Information technology — Conformance test methods for security service crypto suites — Part 16: Crypto suite ECDSA-ECDH security services for air interface communications

Статус документа:: Отменён
Формат:: Электронный (PDF)
Количество страниц:: 21
Дата публикации:: 26 октября 2020 г.
Издание:: ISO/IEC IS 19823 edition 1 version 1
ICS:: 35.030

Тип поставки:

Full version315 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:315 €

Описание (английский):

This document describes test methods for determining the conformance of security crypto suites defined in ISO/IEC 29167-16. This document contains conformance tests for all mandatory and applicable optional functions. The conformance parameters are the following: — parameters that apply directly affecting system functionality and inter-operability; — protocol including commands and replies; — nominal values and tolerances. Unless otherwise specified, the tests in this document are to be applied exclusively to RFID tags and interrogators defined in the ISO/IEC 18000 series using ISO/IEC 29167-16.

Технические детали

Технический комитет: ISO/IEC JTC 1/SC 31 - Automatic identification and data capture techniques
SKU: ISO/IEC 19823-16:2020

Abstract

Overview

ISO/IEC 19823-16:2020 defines conformance test methods for the ECDSA‑ECDH crypto suite used in air‑interface communications for RFID systems. It provides the test procedures and parameters needed to verify that implementations of the crypto suite (as defined in ISO/IEC 29167‑16) conform to protocol, functional and interoperability requirements when used with RFID tags and interrogators in the ISO/IEC 18000 series.

Key topics and technical requirements

Scope and applicability
- Tests apply exclusively to RFID tags and interrogators defined in ISO/IEC 18000 series that use ISO/IEC 29167‑16 crypto suite.
Conformance parameters
- Parameters affecting system functionality and interoperability.
- Protocol verification including commands and replies.
- Nominal values and tolerances.
Test methods
- By demonstration: laboratory testing (statistical sampling when needed). Test labs should meet ISO/IEC 17025.
- By design: vendor-supplied technical analyses or design evidence accepted where appropriate.
Environmental and measurement defaults
- Default test environment: 23 °C ± 3 °C, relative humidity 40–60 %.
- Default tolerance for quantities: ±5 % unless specified otherwise.
- Total measurement uncertainty must be stated in test reports (see ISO Guide to the Expression of Uncertainty in Measurement).
Test setups and artifacts
- Defined test setups for interrogator testing, tag testing, and required test equipment.
- Specific test patterns and sequences for ISO/IEC 18000‑4 Mode 4 (multiple test patterns are specified).
- Annex A provides example test parameters.
Normative references
- Key referenced standards include ISO/IEC 29167‑16, ISO/IEC 18000‑4, and vocabulary in ISO/IEC 19762.
Intellectual property note
- The document records a declared patent claim relevant to RFID security technology (patent holder: China IWNCOMM Co., Ltd.).

Practical applications - who uses this standard

RFID chipset and tag manufacturers - to validate cryptographic conformance and interoperability.
Reader/interrogator vendors - to ensure proper implementation of ECDSA/ECDH crypto functions over the air interface.
Test laboratories and certification bodies - to perform formal conformance testing and issue compliance reports.
Systems integrators and solution providers - to verify components meet required security and protocol behaviors before deployment.
Procurement and compliance teams - to specify testable security conformance criteria in purchasing and certification.

Related standards

ISO/IEC 29167‑16:2015 - Crypto suite ECDSA‑ECDH (functional spec)
ISO/IEC 18000‑4:2018 - Air‑interface parameters at 2.45 GHz (Mode 4)
ISO/IEC 18047 / 18046 - RFID device conformance and performance test methods
ISO/IEC 19762 - AIDC harmonized vocabulary
ISO/IEC 17025 - Laboratory competence requirements

Keywords: ISO/IEC 19823‑16:2020, ECDSA‑ECDH, crypto suite, conformance test methods, RFID, air interface communications, ISO/IEC 29167‑16, ISO/IEC 18000‑4, interrogator, tag, interoperability.

Overview

Key topics and technical requirements

Scope and applicability
- Tests apply exclusively to RFID tags and interrogators defined in ISO/IEC 18000 series that use ISO/IEC 29167‑16 crypto suite.
Conformance parameters
- Parameters affecting system functionality and interoperability.
- Protocol verification including commands and replies.
- Nominal values and tolerances.
Test methods
- By demonstration: laboratory testing (statistical sampling when needed). Test labs should meet ISO/IEC 17025.
- By design: vendor-supplied technical analyses or design evidence accepted where appropriate.
Environmental and measurement defaults
- Default test environment: 23 °C ± 3 °C, relative humidity 40–60 %.
- Default tolerance for quantities: ±5 % unless specified otherwise.
- Total measurement uncertainty must be stated in test reports (see ISO Guide to the Expression of Uncertainty in Measurement).
Test setups and artifacts
- Defined test setups for interrogator testing, tag testing, and required test equipment.
- Specific test patterns and sequences for ISO/IEC 18000‑4 Mode 4 (multiple test patterns are specified).
- Annex A provides example test parameters.
Normative references
- Key referenced standards include ISO/IEC 29167‑16, ISO/IEC 18000‑4, and vocabulary in ISO/IEC 19762.
Intellectual property note
- The document records a declared patent claim relevant to RFID security technology (patent holder: China IWNCOMM Co., Ltd.).

Practical applications - who uses this standard

RFID chipset and tag manufacturers - to validate cryptographic conformance and interoperability.
Reader/interrogator vendors - to ensure proper implementation of ECDSA/ECDH crypto functions over the air interface.
Test laboratories and certification bodies - to perform formal conformance testing and issue compliance reports.
Systems integrators and solution providers - to verify components meet required security and protocol behaviors before deployment.
Procurement and compliance teams - to specify testable security conformance criteria in purchasing and certification.

Related standards

ISO/IEC 29167‑16:2015 - Crypto suite ECDSA‑ECDH (functional spec)
ISO/IEC 18000‑4:2018 - Air‑interface parameters at 2.45 GHz (Mode 4)
ISO/IEC 18047 / 18046 - RFID device conformance and performance test methods
ISO/IEC 19762 - AIDC harmonized vocabulary
ISO/IEC 17025 - Laboratory competence requirements

ISO/IEC 19823-16:2020 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Practical applications - who uses this standard

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Practical applications - who uses this standard

Related standards

Похожие стандарты

Information technology — Automatic identification and data capture techniques — Part 16: Crypto suite ECDSA-E…

Information technology — Radio frequency identification for item management — Part 4: Parameters for air inte…

Information technology. Radio frequency identification for item management. Interference rejection performanc…

Gas analysis — Contents of certificates for calibration gas mixtures — Amendment 1: Cross reference list to I…

Information technology — Radio frequency identification for item management — Part 4: Parameters for air inte…

Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. G…

Information technology — Radio frequency identification device conformance test methods — Part 6: Test method…