ISO/IEC 23200-1:2021 PDF

Information technology — Radio frequency identification for item management — Part 1: Interference rejection performance test method between a tag as defined in ISO/IEC 18000-63 and a heterogeneous wireless system

Название (английский):

ISO/IEC 23200-1:2021

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 13
Дата публикации:: 7 июня 2021 г.
Издание:: ISO/IEC IS 23200 edition 1 version 1
ICS:: 35.040.50

Тип поставки:

Full version195 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:195 €

Описание (английский):

This document defines a test method to evaluate the interference rejection performance of tags covered by ISO/IEC 18000-63 and a heterogeneous wireless system using different access technologies, e.g. radio frequency identification and cell phone network. It specifies the general requirements and test requirements. The test method in this document makes it possible to compare the relative interference rejection performance among tags under a single wireless interference environment. In addition, this document can be used in a benchmarking test according to requirements in a given application or service.

Технические детали

Технический комитет: ISO/IEC JTC 1/SC 31 - Automatic identification and data capture techniques
SKU: ISO/IEC 23200-1:2021

Abstract

Overview

ISO/IEC 23200-1:2021 specifies a laboratory test method to evaluate interference rejection performance between UHF RFID tags (as defined in ISO/IEC 18000-63) and heterogeneous wireless systems (e.g., LoRaWAN, NB‑IoT, WiFi‑HaLow, cellular). The standard defines general requirements, environmental conditions, test set-ups and reporting conventions so stakeholders can compare relative tag performance in a single interference environment or run benchmarking tests for specific applications.

Key topics and requirements

Scope: Measures how other wireless access technologies affect tag receive sensitivity and overall operation in shared frequency bands.
Test environment: Controlled air environment at 23 °C ± 3 °C and 40–60% relative humidity; known RF environment recommended (anechoic chamber for propagative tags).
Test configurations: Supports both bistatic and monostatic interrogator set-ups using test equipment (TE) such as an interrogator emulator compliant with ISO/IEC 18000‑63.
Far‑field placement: Device under test (DUT) must be in the far field; the standard uses the far‑field distance formula (D = 2L²/λ) and recommends D ≈ 50 cm as a practical minimum in some set-ups.
Antenna and polarization: Linear (vertical/horizontal) or circular polarization permitted; sufficient isolation required between interrogator transmit/receive ports or via circulator/directional coupler.
Pre‑conditioning and tolerances: Interrogators should be conditioned for 24 h before testing; default tolerance on equipment and procedure values is ±5%.
Reporting and uncertainty: Test reports must state total measurement uncertainty and identify DUTs; optional statistical summaries (min, max, mean, standard deviation) are supported.
Test variations: Procedures cover tag sensitivity under non‑interference and interference environments and allow for different communication parameters (forward/return link).

Applications and users

ISO/IEC 23200-1:2021 is practical for:

RFID tag manufacturers validating interference robustness
Compliance and test laboratories performing standardized measurements and benchmarking
System integrators and solution providers assessing deployments where LPWAN, cellular and RFID coexist
Network operators and regulators evaluating coexistence and interference mitigation strategies

Use cases include retail inventory, logistics, asset tracking and IoT deployments where UHF RFID must operate reliably alongside LoRaWAN, NB‑IoT, LTE‑M and other wireless systems.

Related standards

ISO/IEC 18000‑63 (UHF RFID air interface) - tags under test
ISO/IEC 18046‑3:2012 - related interference tests between homogeneous RFID systems
ISO/IEC 19762 - harmonized vocabulary referenced for terms

Keywords: ISO/IEC 23200-1:2021, RFID interference test, UHF RFID, interference rejection, ISO/IEC 18000‑63, LoRaWAN, LPWAN, test method, benchmarking.

Overview

Key topics and requirements

Scope: Measures how other wireless access technologies affect tag receive sensitivity and overall operation in shared frequency bands.
Test environment: Controlled air environment at 23 °C ± 3 °C and 40–60% relative humidity; known RF environment recommended (anechoic chamber for propagative tags).
Test configurations: Supports both bistatic and monostatic interrogator set-ups using test equipment (TE) such as an interrogator emulator compliant with ISO/IEC 18000‑63.
Far‑field placement: Device under test (DUT) must be in the far field; the standard uses the far‑field distance formula (D = 2L²/λ) and recommends D ≈ 50 cm as a practical minimum in some set-ups.
Antenna and polarization: Linear (vertical/horizontal) or circular polarization permitted; sufficient isolation required between interrogator transmit/receive ports or via circulator/directional coupler.
Pre‑conditioning and tolerances: Interrogators should be conditioned for 24 h before testing; default tolerance on equipment and procedure values is ±5%.
Reporting and uncertainty: Test reports must state total measurement uncertainty and identify DUTs; optional statistical summaries (min, max, mean, standard deviation) are supported.
Test variations: Procedures cover tag sensitivity under non‑interference and interference environments and allow for different communication parameters (forward/return link).

Applications and users

ISO/IEC 23200-1:2021 is practical for:

RFID tag manufacturers validating interference robustness
Compliance and test laboratories performing standardized measurements and benchmarking
System integrators and solution providers assessing deployments where LPWAN, cellular and RFID coexist
Network operators and regulators evaluating coexistence and interference mitigation strategies

Use cases include retail inventory, logistics, asset tracking and IoT deployments where UHF RFID must operate reliably alongside LoRaWAN, NB‑IoT, LTE‑M and other wireless systems.

Related standards

ISO/IEC 18000‑63 (UHF RFID air interface) - tags under test
ISO/IEC 18046‑3:2012 - related interference tests between homogeneous RFID systems
ISO/IEC 19762 - harmonized vocabulary referenced for terms

Keywords: ISO/IEC 23200-1:2021, RFID interference test, UHF RFID, interference rejection, ISO/IEC 18000‑63, LoRaWAN, LPWAN, test method, benchmarking.

ISO/IEC 23200-1:2021 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Applications and users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and requirements

Applications and users

Related standards

Похожие стандарты

Information technology — Radio frequency identification device performance test methods — Part 3: Test method…

Information technology. Radio frequency identification for item management. Interference rejection performanc…

Information technology — Radio frequency identification for item management — Part 63: Parameters for air int…

Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. G…