Overview
ISO/IEC TR 24750:2007 is a Technical Report (type 2) that provides guidance for the assessment and mitigation of installed balanced cabling channels to support 10GBASE-T. It specifies the transmission performance criteria a channel should meet for 10GBASE-T operation and describes methods to determine whether installed Class E and Class F channels satisfy those requirements. The report is intended as provisional guidance and should be read in conjunction with IEEE 802.3an.
Key topics and technical requirements
The report extends cabling evaluation beyond traditional Class E frequencies and includes parameters needed to support 10GBASE-T (signal range up to 500 MHz) and EMC goals (CISPR/FCC Class A design intent). Major technical areas covered:
- Channel performance parameters
- Return loss
- Insertion loss
- Near-end crosstalk (NEXT) and Power Sum NEXT (PS NEXT)
- Attenuation-to-crosstalk ratios (ACR-N, ACR-F and power-sum variants)
- Alien crosstalk metrics (PS ANEXT, PS AACR-F) and margin computations
- Propagation delay and delay skew
- Assessment methods
- Measurement, certification and documentation procedures to verify installed channels
- Mitigation guidance
- Techniques when in-channel parameters fail
- Strategies to address external/alien noise, including screened vs unscreened cabling, connector grouping, and step-by-step remediation examples
- Scope notes
- Class F channels are noted to support 10GBASE-T up to 100 m without mitigation; Class E channels may require case‑by‑case assessment and mitigation.
Practical applications and users
ISO/IEC TR 24750 is practically valuable for:
- Network designers and cabling specifiers planning 10GBASE-T upgrades
- Cabling installers and contractors performing site certification and remediation
- Data center and IT operations teams assessing legacy Cat6/Class E infrastructure for 10 Gbit/s migration
- Test/validation engineers and third-party certifiers documenting compliance
- Consultants and standards officers developing upgrade roadmaps or procurement specs
Typical uses include assessing existing installed cabling, defining measurement criteria for 10G readiness, troubleshooting performance issues related to alien crosstalk or insertion loss, and planning targeted mitigation to avoid full re‑cabling.
Related standards
- ISO/IEC 11801 (generic cabling)
- IEEE 802.3an (10GBASE-T PHY specification) - the TR is intended to be used together with this standard
- References to EMC specifications such as CISPR/FCC Class A/B in relation to equipment emissions
Keywords: ISO/IEC TR 24750:2007, 10GBASE-T, balanced cabling, Class E, Class F, alien crosstalk, channel assessment, cabling mitigation, insertion loss, NEXT.