ISO/TS 5733:2024 PDF

Plastics — Test method of exposure to white LED lamps

Название (английский):

ISO/TS 5733:2024

Plastics — Test method of exposure to white LED lamps

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 11
Дата публикации:: 6 сентября 2024 г.
Издание:: ISO TS 5733 edition 1 version 1
ICS:: 83.080.01

Тип поставки:

Full version165 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:165 €

Описание (английский):

This document specifies a method for exposing test specimens to white light emitting diode (LED) lamps at specified temperatures and relative humidity. This document is applicable to coloured and uncoloured plastics that are exposed to white LED lamps in indoor environments such as homes, offices, retail outlets, factory and commercial facilities that do not experience solar radiation through window glass. It can be applicable to plastics in other environments as well.

Технические детали

Технический комитет: ISO/TC 61/SC 6 - Ageing, chemical and environmental resistance
SKU: ISO/TS 5733:2024

Abstract

Overview

ISO/TS 5733:2024 - "Plastics - Test method of exposure to white LED lamps" defines a laboratory method for exposing plastic test specimens to white light‑emitting diode (LED) lamps under controlled temperature and relative humidity. The Technical Specification is intended for coloured and uncoloured plastics used in indoor environments (homes, offices, retail, factory and commercial facilities) where solar radiation through window glass is not present. The method helps assess LED‑induced material changes and estimate product life under common indoor LED lighting.

Key topics and technical requirements

Light source: Use one or more white LED lamps (typically blue LED chip + phosphor). Report manufacturer, model, correlated colour temperature (CCT) and average colour‑rendering index (Ra).
Typical lamp characteristics: Example specification - CCT 5000 K ± 250 K, Ra > 80; spectral irradiance in 300–400 nm must be

Overview

Key topics and technical requirements

Light source: Use one or more white LED lamps (typically blue LED chip + phosphor). Report manufacturer, model, correlated colour temperature (CCT) and average colour‑rendering index (Ra).
Typical lamp characteristics: Example specification - CCT 5000 K ± 250 K, Ra > 80; spectral irradiance in 300–400 nm must be

ISO/TS 5733:2024 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts