1 Scope
This Technical Specification specifies a compliance test for routine testing providing
information on the leaching of monolithic waste which can be obtained under the experimental conditions specified hereafter with
a single batch leaching test at a specified liquid to surface area ratio ( L/A ) of 12 (cm 3 ·cm -2 ). It applies to test portion of monolithic waste of regular shape, with a minimum dimension of 40 mm in all directions, obtained e.g.
by cutting, coring or moulding.
This document is not applicable if the surface area of the test portion cannot be determined by simple geometrical means.
This document has been developed to determine the release of mainly inorganic constituents from wastes. It does not take into account the particular
characteristics of organic constituents nor the consequences of microbiological processes
in organic degradable wastes.
The test procedure specified in this document produces an eluate which subsequently need to be characterized physically and chemically, according
to appropriate standard methods.
NOTE 1 If, in order to comply with the requirement of regular shape, the test portion is prepared by cutting or coring, then new surfaces are exposed which can lead to
change(s) in leaching properties.
NOTE 2 ...