Photovoltaic (PV) modules. Cyclic (dynamic) mechanical load testing
Photovoltaic (PV) modules. Cyclic (dynamic) mechanical load testing
Мы хотим включить аналитику посещений, чтобы понимать, что искать людям на сайте. Без вашего согласия счётчики не загружаются. Политика конфиденциальности
What is PD IEC/TS 62782 -Photovoltaic (PV) modules about?
PD IEC/TS 62782 is a technical specification that provides a test method for performing a cyclic (dynamic) mechanical load test in which the module is supported at the design support points and a uniform load normal to the module surface is cycled in alternating negative and positive directions. This test can be performed at any module temperature within the normal operating temperature range. Since the results have been determined to depend on the module temperature during the application of the load it is critical to maintain the module at a constant temperature during the performance of this test. This technical specification has historically been applied to rigid modules. It cannot be applied to flexible modules unless they are designed to be mounted in a rigid manner. In which case, the cyclic (dynamic) mechanical load test can be applied to the flexible module in its rigid mounting system.
Who is PD IEC/TS 62782 -Photovoltaic (PV) modules for?
PD IEC/TS 62782 on photovoltaic modules is useful for:
PV module manufacturers PV power system manufacturers Photoelectric device manufacturers Solar energy engineering industry Product designers Quality assurance an...
Другие стандарты PD