Поиск

Intelligent transport systems. Traffic and travel information messages via traffic message coding. Coding pro…

Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings. Vocabulary.

Condition monitoring and diagnostics of machine systems. Tribology-based monitoring and diagnostics. General…

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by m…

Plastics. Polyurethane raw materials. Determination of isocyanate content.

Plastics. Polyols for use in the production of polyurethanes. Determination of water content.

Metallic materials. Charpy pendulum impact test. Testing of miniature Charpy-type V-notch test pieces.

Machinery for forestry. Portable hand-held brush cutters and grass trimmers with backpack mounted combustion…

Intelligent transport systems — Graphic data dictionary — Part 1: Specification

Overview ISO 14823-1:2024 - Intelligent transport systems - Graphic data dictionary - Part 1: Specification - defines a Graphic Data Dictionary (GDD): a language‑independent coding system for existin…

Road transport and traffic telematics — Automatic vehicle and equipment identification — Numbering and data s…

Overview ISO 14816:2005/Amd 1:2019 is an amendment to the international standard focusing on road transport and traffic telematics. Specifically, it addresses automatic vehicle and equipment identifi…

Plastics — Aromatic isocyanates for use in the production of polyurethane — Determination of acidity — Amendm…

Overview ISO 14898:1999/Amd 1:2011 is an international standard issued by the International Organization for Standardization (ISO) that focuses on the determination of acidity in aromatic isocyanates…

Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 2:…

Overview EN ISO 14819-2:2021/A1:2026 is an amendment to the international standard for Intelligent Transport Systems (ITS), focusing on traffic and travel information messages using traffic message c…

Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for gen…

Overview EN ISO 14890:2026 – Conveyor belts – Specification for rubber- or plastics-covered conveyor belts of textile construction for general use sets out the requirements for conveyor belts with te…

Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses (ISO 14889:2025)

Overview - EN ISO 14889:2025 (Ophthalmic optics) EN ISO 14889:2025, titled Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses, defines the core requirements for…

Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses (ISO 14889:2025)

Overview - EN ISO 14889:2025 (Ophthalmic optics) EN ISO 14889:2025, titled Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses, defines the core requirements for…

Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO 14880-2:2024)

Overview EN ISO 14880-2:2024 - "Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations" (adopted by CEN as EN ISO 14880-2:2024) specifies standardized laboratory met…

Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2024)

Overview EN ISO 14880-4:2024 (ISO 14880-4:2024) - published by CEN/ISO - defines standardized test methods for geometrical properties of microlenses in microlens arrays. It applies to very small lens…

Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront ab…

Overview EN ISO 14880-3:2024 (CEN endorsement of ISO 14880-3:2024) defines standardized test methods for optical properties of microlenses in microlens arrays other than wavefront aberrations. It app…

Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO 14880-2:2024)

Overview EN ISO 14880-2:2024 - "Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations" (adopted by CEN as EN ISO 14880-2:2024) specifies standardized laboratory met…

Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront ab…

Overview EN ISO 14880-3:2024 (CEN endorsement of ISO 14880-3:2024) defines standardized test methods for optical properties of microlenses in microlens arrays other than wavefront aberrations. It app…

Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880‑4:2024)

Overview EN ISO 14880-4:2024 (ISO 14880-4:2024) - published by CEN/ISO - defines standardized test methods for geometrical properties of microlenses in microlens arrays. It applies to very small lens…

Intelligent transport systems - Graphic data dictionary - Part 1: Specification (ISO 14823-1:2024)

Overview EN ISO 14823-1:2024 / ISO 14823-1:2024 specifies a Graphic Data Dictionary (GDD) for intelligent transport systems (ITS). The GDD defines a standardized, language‑independent coding system f…

Intelligent transport systems - Graphic data dictionary - Part 1: Specification (ISO 14823-1:2024)

Overview EN ISO 14823-1:2024 / ISO 14823-1:2024 specifies a Graphic Data Dictionary (GDD) for intelligent transport systems (ITS). The GDD defines a standardized, language‑independent coding system f…

Integrated optics - Interfaces - Parameters relevant to coupling properties (ISO 14881:2021)

Overview EN ISO 14881:2021 - Integrated optics - Interfaces - Parameters relevant to coupling properties - is a CEN-adopted international standard that defines the vocabulary and key parameters for c…

Integrated optics - Interfaces - Parameters relevant to coupling properties (ISO 14881:2021)

Overview EN ISO 14881:2021 - Integrated optics - Interfaces - Parameters relevant to coupling properties - is a CEN-adopted international standard that defines the vocabulary and key parameters for c…

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by…

Overview EN ISO 14852:2021 - Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - specifies a laboratory method by analysis of evolved carbon dioxide (CO…

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by…

Overview EN ISO 14852:2021 - Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - specifies a laboratory method by analysis of evolved carbon dioxide (CO…

Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 2:…

Overview SIST EN ISO 14819-2:2021 (ISO 14819-2:2021) is part of the ISO 14819 series for Intelligent Transport Systems (ITS). It specifies the standardized Event and Information Codes used to encode…

Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 1:…

Overview - EN ISO 14819-1:2021 (RDS‑TMC / ALERT‑C) EN ISO 14819-1:2021 defines the ALERT‑C coding protocol for delivering traffic and travel information over the Radio Data System - Traffic Message C…

Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 3:…

Overview SIST EN ISO 14819-3:2021 (ISO 14819-3:2021) defines location referencing rules for Traffic Message Channel (TMC) systems using the ALERT‑C protocol. Part of the ISO 14819 series for intellig…

Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 1:…

Overview - EN ISO 14819-1:2021 (RDS‑TMC / ALERT‑C) EN ISO 14819-1:2021 defines the ALERT‑C coding protocol for delivering traffic and travel information over the Radio Data System - Traffic Message C…

Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 2:…

Overview EN ISO 14819-2:2021 (ISO 14819-2:2021) is part of the ISO 14819 series for Intelligent Transport Systems (ITS). It specifies the standardized Event and Information Codes used to encode traff…

Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 3:…

Overview EN ISO 14819-3:2021 (ISO 14819-3:2021) defines location referencing rules for Traffic Message Channel (TMC) systems using the ALERT‑C protocol. Part of the ISO 14819 series for intelligent t…

Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO 14880-1:2019)

Overview EN ISO 14880-1:2019 - Optics and photonics: Microlens arrays (Part 1: Vocabulary) defines agreed terms, symbols and units for microlens arrays and systems of microlens arrays. This third-edi…

Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data s…

Overview EN ISO 14816:2005/A1:2019 is an amendment to the international standard EN ISO 14816 (ISO 14816:2005) that governs automatic vehicle and equipment identification (AVIE) for road transport an…

Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO 14880-1:2019)

Overview EN ISO 14880-1:2019 - Optics and photonics: Microlens arrays (Part 1: Vocabulary) defines agreed terms, symbols and units for microlens arrays and systems of microlens arrays. This third-edi…

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by…

Overview EN ISO 14851:2019 (CEN) - also published as ISO 14851:2019 - specifies a laboratory respirometric method for determining the ultimate aerobic biodegradability of plastic materials in an aque…

Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data s…

Overview EN ISO 14816:2005/A1:2019 is an amendment to the international standard EN ISO 14816 (ISO 14816:2005) that governs automatic vehicle and equipment identification (AVIE) for road transport an…

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by…

Overview EN ISO 14851:2019 (CEN) - also published as ISO 14851:2019 - specifies a laboratory respirometric method for determining the ultimate aerobic biodegradability of plastic materials in an aque…

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting condi…

Overview: EN ISO 14855-2:2018 (ISO 14855-2) EN ISO 14855-2:2018 specifies a laboratory-scale method to determine the ultimate aerobic biodegradability of plastic materials under controlled composting…

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting condi…

Overview: EN ISO 14855-2:2018 (ISO 14855-2) EN ISO 14855-2:2018 specifies a laboratory-scale method to determine the ultimate aerobic biodegradability of plastic materials under controlled composting…

Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system -…

Overview EN ISO 14853:2017 (ISO 14853:2016) specifies a laboratory test method to determine the ultimate anaerobic biodegradability of plastic materials in an aqueous system by measuring biogas produ…

Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system -…

Overview EN ISO 14853:2017 (ISO 14853:2016) specifies a laboratory test method to determine the ultimate anaerobic biodegradability of plastic materials in an aqueous system by measuring biogas produ…

Dentistry - Implants - Dynamic loading test for endosseous dental implants (ISO 14801:2016)

Overview EN ISO 14801:2016 (ISO 14801:2016) - Dentistry - Implants - Dynamic loading test for endosseous dental implants - specifies a standardized method for dynamic (fatigue) testing of single‑post…

Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)

Overview EN ISO 148-1:2016 - Metallic materials - Charpy pendulum impact test - Part 1: Test method defines the standardized procedure for Charpy pendulum impact testing of metallic materials using V…

Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch…

Overview EN ISO 148-3:2016 (ISO 148-3:2016) specifies requirements for the preparation and characterization of Charpy V‑notch reference test pieces used for the indirect verification of pendulum impa…

Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016)

Overview EN ISO 148-2:2016 - Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines specifies how to verify pendulum-type Charpy impact testing machines used for…

Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)

Overview EN ISO 148-1:2016 - Metallic materials - Charpy pendulum impact test - Part 1: Test method defines the standardized procedure for Charpy pendulum impact testing of metallic materials using V…

Dentistry - Implants - Dynamic loading test for endosseous dental implants (ISO 14801:2016)

Overview EN ISO 14801:2016 (ISO 14801:2016) - Dentistry - Implants - Dynamic loading test for endosseous dental implants - specifies a standardized method for dynamic (fatigue) testing of single‑post…

Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch…

Overview EN ISO 148-3:2016 (ISO 148-3:2016) specifies requirements for the preparation and characterization of Charpy V‑notch reference test pieces used for the indirect verification of pendulum impa…

Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016)

Overview EN ISO 148-2:2016 - Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines specifies how to verify pendulum-type Charpy impact testing machines used for…

Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016)

Overview - EN ISO 14895:2016 / ISO 14895:2016 EN ISO 14895:2016 (ISO 14895:2016) is the international/CEN standard that specifies the design, construction and installation of permanently installed li…

Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016)

Overview - EN ISO 14895:2016 / ISO 14895:2016 EN ISO 14895:2016 (ISO 14895:2016) is the international/CEN standard that specifies the design, construction and installation of permanently installed li…

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting condi…

Overview EN ISO 14855-1:2012 (ISO 14855-1:2012) defines a laboratory method for determining the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. The stan…

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting condi…

Overview EN ISO 14855-1:2012 (ISO 14855-1:2012) defines a laboratory method for determining the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. The stan…

Slotted countersunk (flat) head tapping screws (ISO 1482:2011)

Overview EN ISO 1482:2011 (ISO 1482:2011) is the international/CEN standard that specifies the characteristics of slotted countersunk (flat) head tapping screws. It covers thread sizes from ST 2,2 to…

Slotted pan head tapping screws (ISO 1481:2011)

Overview EN ISO 1481:2011 (ISO 1481:2011) is the CEN-endorsed European and International standard that defines the characteristics of slotted pan head tapping screws. The standard applies to tapping…

Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)

Overview EN ISO 1483:2011 (adoption of ISO 1483:2011 by CEN) specifies the characteristics of slotted raised countersunk (oval) head tapping screws. The standard covers thread sizes ST 2,2 to ST 9,5…

Slotted pan head tapping screws (ISO 1481:2011)

Overview EN ISO 1481:2011 (ISO 1481:2011) is the CEN-endorsed European and International standard that defines the characteristics of slotted pan head tapping screws. The standard applies to tapping…

Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)

Overview EN ISO 1483:2011 (adoption of ISO 1483:2011 by CEN) specifies the characteristics of slotted raised countersunk (oval) head tapping screws. The standard covers thread sizes ST 2,2 to ST 9,5…