Мы хотим включить аналитику посещений, чтобы понимать, что искать людям на сайте. Без вашего согласия счётчики не загружаются. Политика конфиденциальности
Найдено: 60+
1 Scope This document defines the requirements and operation of the on-board vehicle equipment that enables magnetic field wireless power transfer (MF-WPT) between supply device and electric vehicles…
1 Scope This document provides criteria for planning or rating a failure reporting, analysis and corrective action ( FRACA ) process, with regard to its capability to collect, process, assess, and el…
1 Scope This document in combination with ISO 5474‑1 specifies requirements for conductive power transfer using alternating current (AC) with a voltage up to 1 000 V a.c. between electrically-propell…
1 Scope This document specifies general requirements for conductive power transfer with a voltage up to 1 000 V a.c. (alternative current) and up to 1 500 V d.c. (direct current) between electrically…
1 Scope This document in combination with ISO 5474‑1 specifies requirements for conductive power transfer using direct current (DC) with a voltage up to 1 500 V d.c. between electrically propelled ro…
1 Scope This International Standard specifies the dimensions of reduction sleeves with 7/24 external taper No. 30-40-45-50 and 60 and Morse internal taper No. 1 to 6 (Morse taper No. 4, 5 and 6 being…
Overview ISO 5496:2006/Amd 1:2018 is an important amendment to the international standard focused on sensory analysis, specifically targeting the initiation and training of assessors in the detection…
Overview ISO 5492:2008/Amd 1:2016 is an amendment to ISO 5492:2008 - the international vocabulary for sensory analysis. Rather than prescribing procedures, this amendment expands and clarifies termin…
Overview ISO 5495:2005/Amd 1:2016 is an amendment to the international standard ISO 5495:2005, focusing on sensory analysis methodology-specifically the paired comparison test. This amendment refines…
Overview ISO 5457:1999/Amd 1:2010 is an important amendment to the international standard ISO 5457:1999, issued by the International Organization for Standardization (ISO). This standard focuses on t…
Overview SIST EN ISO 5403-1:2026 is an international standard specifying a method for determining the dynamic water resistance of flexible leather by repeated linear compression using a penetrometer.…
Overview EN ISO 5403-1:2025 is an international standard specifying a method for determining the dynamic water resistance of flexible leather by repeated linear compression using a penetrometer. Deve…
Overview SIST ISO 54002:2025 - Quality management systems - Guidance for the application of ISO 9001:2015 in police organizations - provides sector-specific guidance to help police organizations appl…
Overview ISO 5409:2024 - "Stationary source emissions - Chemical absorption method for sampling and determining mercury species in flue gas" specifies a validated chemical absorption procedure for me…
Overview EN ISO 544:2024 - Welding consumables: Technical delivery conditions for filler materials and fluxes - defines the product types, dimensions and tolerances, and marking and packaging require…
Overview EN ISO 5459:2024 - Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2024) is the third-edition international/CEN standard that defines…
Overview EN ISO 5463:2024 - Geometrical product specifications (GPS) for rotary axis form‑measuring instruments - specifies the primary design and metrological characteristics required for instrument…
Overview ISO 5451:2022 - "Ferrovanadium - Specification and conditions of delivery" defines the minimum specifications, delivery conditions and quality-control procedures for ferrovanadium commonly s…
Overview EN ISO 5467-1:2022 / ISO 5467-1:2022 specifies general requirements and test methods for mobile dental units and mobile dental patient chairs intended for use in permanent healthcare facilit…
Overview EN ISO 5467-2:2022 - "Dentistry - Mobile dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems" specifies requirements and test methods for the fluid an…
Overview - EN ISO 5402-1:2022 (Flexometer method) EN ISO 5402-1:2022 specifies a standardized laboratory method for determining the dry or wet flex resistance of leather and surface finishes using a…
Overview EN ISO 5470-2:2021 - titled "Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2021)" - is a CEN-adopted international standa…
Overview EN ISO 54321:2021 - published by CEN and identical to ISO 54321:2020 - specifies standardized procedures for the digestion of aqua regia soluble fractions of elements in soil, treated biowas…
Overview ISO 5446:2017 - Ferromanganese: Specification and conditions of delivery defines requirements for ferromanganese supplied for steelmaking and foundry use. The standard covers ordering inform…
Overview SIST ISO 5496:2011/A1:2018 is an important amendment to the international standard focused on sensory analysis, specifically targeting the initiation and training of assessors in the detecti…
Overview EN ISO 5458:2018 - Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018) is a CEN-endorsed international standar…
Overview EN ISO 5470-1:2016 - "Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader" describes a standardized method for assessing the abrasive wear resis…
Overview SIST EN ISO 5495:2007/A1:2016 (CEN) is an amendment to the paired comparison test methods used in sensory analysis. This document updates the European adoption of ISO 5495 and clarifies proc…
Overview EN ISO 5495:2007/A1:2016 (CEN) is an amendment to the paired comparison test methods used in sensory analysis. This document updates the European adoption of ISO 5495 and clarifies procedure…
Overview EN ISO 5402-2:2015 - Leather: Determination of flex resistance, Part 2 (Vamp flex method) specifies a laboratory method to assess the wet or dry flex resistance of leather and surface finish…
Overview EN ISO 5436-2:2012 (ISO 5436-2:2012) is a Geometrical Product Specification (GPS) standard that defines software measurement standards for surface texture measured by the profile method (as…
Overview EN ISO 5403-2:2011 (ISO 5403-2:2011) specifies a laboratory method for determining the dynamic water resistance of flexible leather by repeated angular compression - commonly known as the Ma…
Overview EN ISO 5404:2011 - Leather: Determination of water resistance of heavy leathers specifies a laboratory method to evaluate the water resistance of heavy leathers. Adopted by CEN and prepared…
Overview ISO 5496:2006 - "Sensory analysis - Methodology - Initiation and training of assessors in the detection and recognition of odours" provides standardized guidance for selecting, initiating an…
Overview EN ISO 5457:1999/A1:2010 (ISO 5457:1999/Amd 1:2010) is a CEN-endorsed amendment to the international standard on technical product documentation that specifies the sizes and layout of drawin…
Overview ISO 5-4:2009 - "Photography and graphic technology - Density measurements - Part 4: Geometric conditions for reflection density" defines the geometric measurement conditions used to determin…
Overview EN ISO 5495:2007 (ISO 5495:2005) specifies the paired comparison test method for sensory analysis. Also known as a directional difference test or 2-AFC (two-alternative forced choice), this…
Overview ISO 5426-2:1996 - "Information and documentation - Extension of the Latin alphabet coded character set for bibliographic information interchange - Part 2" defines a supplemental coded charac…
Overview ISO 5436-1:2000 - "Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures" specifies the characteristics of material me…
Overview EN ISO 5456-2:1999 (ISO 5456-2:1996) defines how to produce orthographic representations in technical drawings. It is part of the ISO 5456 series on projection methods and establishes basic…