Мы хотим включить аналитику посещений, чтобы понимать, что искать людям на сайте. Без вашего согласия счётчики не загружаются. Политика конфиденциальности
Найдено: 60+
Overview ISO 7539-6:2018/Amd 1:2024 is an important amendment to the international standard focusing on stress corrosion testing of metals and alloys. Specifically, it addresses the preparation and u…
Overview ISO 7531:1987 - "Wire rope slings for general purposes - Characteristics and specifications" defines design, identification, manufacture and rating rules for general-purpose wire rope slings…
Overview EN ISO 75-3:2025 - Plastics: Determination of temperature of deflection under load, Part 3 - specifies a laboratory method to measure the temperature of deflection under load for high‑streng…
Overview EN ISO 7533:2024 / ISO 7533:2024 defines a practical, organisation-neutral method to identify specifications in technical product documentation (TPD). The standard provides rules, graphical…
Overview SIST EN ISO 7539-6:2018/A1:2024 is an amendment to the international standard focusing on the corrosion of metals and alloys, specifically targeting stress corrosion testing. This Part 6 of…
Overview EN ISO 7539-6:2018/A1:2024 is an amendment to the international standard focusing on the corrosion of metals and alloys, specifically targeting stress corrosion testing. This Part 6 of the I…
Overview EN ISO 7539-9:2021 / ISO 7539-9:2021 - "Corrosion of metals and alloys - Stress corrosion testing - Part 9" defines procedures for the preparation and use of pre-cracked specimens for stress…
Overview EN ISO 7539-10:2020 (ISO 7539-10:2020) specifies the reverse U-bend (RUB) method for stress corrosion testing of metals and alloys. The standard defines procedures for designing, preparing a…
Overview EN ISO 7539-6:2018 - "Corrosion of metals and alloys - Stress corrosion testing - Part 6" (Corrected version 2018-11) is a CEN-endorsed ISO standard that specifies procedures for the design,…
Overview - ISO 7530-1:2015 (Nickel alloys, FAAS analysis) ISO 7530-1:2015 specifies flame atomic absorption spectrometric (FAAS) methods for the determination of cobalt, chromium, copper, iron and ma…
Overview EN ISO 7539-11:2014 / ISO 7539-11:2013 provides guidance for designing and conducting laboratory tests to evaluate the resistance of metals and alloys to hydrogen embrittlement and hydrogen‑…
Overview EN ISO 7539-1:2012 (ISO 7539-1:2012) provides general guidance on stress corrosion testing for metals and alloys. Published by CEN/ISO, this Part 1 describes the general considerations to be…
Overview EN ISO 7539-8:2008 - "Corrosion of metals and alloys - Stress corrosion testing - Part 8: Preparation and use of specimens to evaluate weldments" provides guidance on preparing, selecting an…
Overview SIST EN ISO 7539-7:2005, titled Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing, is a critical European Standard developed by CEN, har…
Overview EN ISO 7539-7:2005, titled Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing, is a critical European Standard developed by CEN, harmoniz…
Overview SIST EN ISO 7539-5:1999 is an international standard developed by the European Committee for Standardization (CEN) in alignment with ISO 7539-5:1989. This standard focuses on stress corrosio…
Overview EN ISO 7539-3:1995 - Corrosion of metals and alloys - Stress corrosion testing - Part 3: Preparation and use of U-bend specimens (ISO 7539-3:1989) describes procedures for designing, prepari…
Overview SIST EN ISO 7539-2:1999 specifies the procedures for the design, preparation, and use of bent-beam specimens in the testing of metals and alloys for susceptibility to stress corrosion cracki…
Overview EN ISO 7539-4:1995 / ISO 7539-4:1989 - Corrosion of metals and alloys - Stress corrosion testing - Part 4 defines procedures for the preparation and use of uniaxially loaded tension specimen…
Overview - EN ISO 7536:1996 (ISO 7536:1994) EN ISO 7536 specifies the induction period method for determining the oxidation stability of gasoline (finished aviation and motor gasolines). The test acc…
Overview SIST ISO 7531:1997 specifies the characteristics and specifications for wire rope slings intended for general purpose lifting applications. Developed by SIST, this standard establishes guide…
Overview SIST ISO 7530-8:1996 provides a standardized method for determining silicon content in nickel alloys using flame atomic absorption spectrometric (FAAS) analysis. This international standard…
Overview SIST ISO 7530-7:1996 is an international standard developed by ISO/TC 155, Sub-Committee SC 4, focused on the chemical analysis of nickel alloys. This part of the ISO 7530 series specifies a…
Overview SIST ISO 7530-9:1996 is an international standard developed by the International Organization for Standardization (ISO) that specifies a flame atomic absorption spectrometric method for dete…
Overview ISO 7535:1984 - "Surface active agents - Detergents for domestic machine dishwashing - Guide for comparative testing of performance" is an ISO guideline for designing and reporting comparati…
Overview EN ISO 7539-2:1995 (ISO 7539-2:1989) describes procedures for designing, preparing and using bent-beam specimens for stress corrosion testing of metals and alloys. The standard is part of th…
Overview EN ISO 7539-5:1995 is an international standard developed by the European Committee for Standardization (CEN) in alignment with ISO 7539-5:1989. This standard focuses on stress corrosion tes…
What is ISO 7539 ‑ 10 about? ISO 7539 ‑ 10 is the 10 th part of a multi-series standard. It deals with stress corrosion testing for metals and alloys using the reverse U-bend method. ISO 7539 ‑ 10 sp…
What is ISO 7539-3 – Corrosion of metals and alloys about? ISO 7539-3 is an international standard and a part of the ISO 7539 series that discusses the preparation and use of U-bend specimens for cor…
1 Scope 1.1 This part of ISO 7539 describes the general considerations that apply when designing and conducting tests to assess susceptibility of metals to stress corrosion .
What is ISO 7539-4 – Corrosion of metal and alloys about? ISO 7539-4 is an international standard and a part of the ISO 7539 series that discusses the Preparation and use of uniaxially loaded tension…
1 Scope This document specifies the general requirements for designing and conducting tests to assess the susceptibility of metals and alloys to stress corrosion cracking under atmospheric exposure c…
1 Scope This part of ISO 7539 covers procedures for designing, preparing and using reversed U-bend (RUB) test specimens for investigating the susceptibility of the metal to stress corrosion cracking.…
What is ISO 7539-2 – Corrosion of metals and alloys about? ISO 7539-2 is an international standard and a part of the ISO 7539 series that discusses the preparation and use of bent-beam specimens for…
1 Scope This part of ISO 7539 gives guidance on the key features that should be accounted for in designing and conducting tests to evaluate the resistance of a metal or its alloy to hydrogen embrittl…
1 Scope This document specifies rules to identify specifications in the technical product documentation (TPD). It is applicable, if needed, to facilitate communication.
1 Scope This part of ISO 7539 covers procedures for conducting slow strain rate tests for investigating susceptibility of a metal to stress corrosion cracking, including hydrogen-induced failure. The…
1 Scope This part of ISO 75 specifies a method for the determination of the temperature of deflection under load of high-strength thermosetting laminates and compression-moulded long-fibre-reinforced…