SIST EN ISO 8871-3:2004 PDF

Elastomeric parts for parenterals and for devices for pharmaceuticals use - Part 3: Determination of released-particle count (ISO 8871-3:2003)

Название (английский):

SIST EN ISO 8871-3:2004

Elastomeric parts for parenterals and for devices for pharmaceuticals use - Part 3: Determination of released-particle count (ISO 8871-3:2003)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 1 ноября 2004 г.
ICS:: 11.040.20
Технический комитет:: VAZ - Healthcare

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

Elastomeric closures may be superficially contaminated with visible and subvisible particles, and fragments can also be produced when the closure is pierced by a needle. Such particles may be transferred to pharmaceutical preparations in contact with the elastomeric parts and affect the quality of such preparations. ISO 8871-3:2003 specifies methods for the determination of the number of visible and subvisible particles, respectively, detached from elastomeric parts by rinsing. It does not specify particle contamination limits. These will have to be agreed upon between manufacturer and user.

Технические детали

SKU: SIST EN ISO 8871-3:2004

Abstract

Overview

SIST EN ISO 8871-3:2004 is a critical international standard developed by CEN and ISO that specifies methods for evaluating elastomeric parts used in parenteral and pharmaceutical devices. Specifically, it focuses on the determination of released-particle count from elastomeric closures, which are commonly employed in pharmaceutical packaging and medical devices. These elastomeric parts may release visible and subvisible particles either from surface contamination or when pierced by needles, potentially compromising the quality and safety of pharmaceutical products.

This standard outlines rigorous test methods to quantify the number of particles detached from these elastomeric components via rinsing. It is designed to support manufacturers and users in assessing contamination risks, although it does not define particle contamination limits, leaving those criteria to be mutually agreed upon by the involved parties.

Key Topics

Particle Contamination Risks Elastomeric closures can harbor visible (>25 µm) and subvisible particles (<25 µm) on their surfaces or generate fragments during needle puncturing. These particles may contaminate injectable pharmaceuticals, affecting safety and efficacy.
Determination Methods The standard defines two main test methods:
- Visible-particle count determination: Using rinse fluid filtration and microscopy to count particles classified into three size categories (>25 µm to >100 µm).
- Subvisible-particle count determination: Using light extinction particle counters to detect particles in four size ranges (2 µm to

Overview

Key Topics

Particle Contamination Risks Elastomeric closures can harbor visible (>25 µm) and subvisible particles (<25 µm) on their surfaces or generate fragments during needle puncturing. These particles may contaminate injectable pharmaceuticals, affecting safety and efficacy.
Determination Methods The standard defines two main test methods:
- Visible-particle count determination: Using rinse fluid filtration and microscopy to count particles classified into three size categories (>25 µm to >100 µm).
- Subvisible-particle count determination: Using light extinction particle counters to detect particles in four size ranges (2 µm to

SIST EN ISO 8871-3:2004 PDF

Технические детали

Abstract

Overview

Key Topics

Похожие стандарты

Abstract

Overview

Key Topics

Похожие стандарты

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

Facility management - Development of the facility management organization (ISO 41002:2026)

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…

Anaesthetic and respiratory equipment - Tracheal tubes and connectors - Amendment 1: Reinstatement of third e…

Dentistry - Powered polymerization activators (ISO 10650:2026)