SIST EN ISO 898-5:2012 PDF

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)

Название (английский):

SIST EN ISO 898-5:2012

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 22
Дата публикации:: 9 июля 2012 г.
ICS:: 21.060.10
Технический комитет:: ISEL - Mechanical elements

Тип поставки:

Full version330 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:330 €

Описание (английский):

ISO 898-5:2012 specifies mechanical and physical properties of set screws and similar threaded fasteners made of carbon steel or alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when set screws and similar threaded fasteners are considered all together) which conform to the requirements of ISO 898-5:2012 are evaluated at that ambient temperature range. Fasteners according to ISO 898-5:2012 are classified to specified hardness classes and are intended for use under compressive stress only. ISO 898-5:2012 is applicable to set screws and similar fasteners: made of carbon steel or alloy steel, having a triangular ISO metric screw thread according to ISO 68-1, with a coarse pitch thread M1,6 to M30, and fine pitch thread M8×1 to M30×2, with diameter/pitch combinations according to ISO 261 and ISO 262, and having thread tolerances according to ISO 965-1 and ISO 965-2.

Технические детали

SKU: SIST EN ISO 898-5:2012

Abstract

Overview

EN ISO 898-5:2012 (ISO 898-5:2012) specifies the mechanical and physical properties of set screws and similar threaded fasteners made of carbon steel or alloy steel. It covers fasteners with ISO metric triangular threads (coarse and fine pitch) tested at an ambient temperature of 10 °C to 35 °C. Fasteners conforming to this part are classified by specified hardness classes and are intended for use under compressive stress only. The standard applies to common metric sizes (coarse thread M1.6 to M30; fine pitch M8×1 to M30×2) and references established thread dimensions and tolerances.

Key topics and requirements

Hardness classes and designation: hardening classes are designated as 14H, 22H, 33H and 45H. The numerical part equals one-tenth of the minimum Vickers hardness (HV min: 140, 220, 330, 450 respectively).
Material and heat treatment limits: requirements for carbon/alloy steels and basic chemical composition limits for each class.
Thread form and sizes: ISO metric triangular thread per ISO 68-1; diameter/pitch per ISO 261/262; thread tolerances per ISO 965-1/2.
Test methods: specified procedures include hardness testing, decarburization and carburization assessment, and a proof torque test (for certain hexagonal/hexalobular socket set screws of hardness class 45H).
Inspection levels: manufacturer, supplier and purchaser inspection applicability and responsibilities.
Marking and traceability: rules for manufacturer identification, hardness-class marking and package labelling.
Hydrogen embrittlement: informative Annex A covers hydrogen embrittlement relief after electroplating.
Limitations: the standard does not specify tensile/shear strength, weldability, corrosion resistance or suitability outside the -50 °C to +150 °C application guidance (users must consult metallurgists for extreme temperatures up to +300 °C).

Applications

Standardizes set screws and similar threaded fasteners used to locate or secure components where compressive loading is primary (e.g., mechanical assemblies, locking components, machine tool fixtures).
Ensures consistent hardness, surface integrity and testing so fasteners perform predictably in assembly, maintenance and production environments.
Supports procurement specifications, quality control, and conformity assessment for manufacturers and suppliers of metric set screws.

Who uses this standard

Fastener manufacturers and heat-treatment shops
Design and mechanical engineers specifying fasteners
Quality assurance, inspection labs and procurement teams
Metallurgists advising on material and temperature suitability

Related standards

ISO 68-1 (metric thread form), ISO 261 / ISO 262 (diameter/pitch), ISO 965-1 / ISO 965-2 (thread tolerances)
ISO 225 (symbols), ISO 6506 / 6507 / 6508 (hardness tests), ISO 6157-1 (surface discontinuities), ISO 16426 (quality assurance)
Other parts of ISO 898 (Parts 1, 2, 6, 7) for complementary fastener properties

Keywords: EN ISO 898-5:2012, ISO 898-5, set screws, fasteners, hardness classes, metric thread, mechanical properties, hardness testing.

Overview

Key topics and requirements

Hardness classes and designation: hardening classes are designated as 14H, 22H, 33H and 45H. The numerical part equals one-tenth of the minimum Vickers hardness (HV min: 140, 220, 330, 450 respectively).
Material and heat treatment limits: requirements for carbon/alloy steels and basic chemical composition limits for each class.
Thread form and sizes: ISO metric triangular thread per ISO 68-1; diameter/pitch per ISO 261/262; thread tolerances per ISO 965-1/2.
Test methods: specified procedures include hardness testing, decarburization and carburization assessment, and a proof torque test (for certain hexagonal/hexalobular socket set screws of hardness class 45H).
Inspection levels: manufacturer, supplier and purchaser inspection applicability and responsibilities.
Marking and traceability: rules for manufacturer identification, hardness-class marking and package labelling.
Hydrogen embrittlement: informative Annex A covers hydrogen embrittlement relief after electroplating.
Limitations: the standard does not specify tensile/shear strength, weldability, corrosion resistance or suitability outside the -50 °C to +150 °C application guidance (users must consult metallurgists for extreme temperatures up to +300 °C).

Applications

Standardizes set screws and similar threaded fasteners used to locate or secure components where compressive loading is primary (e.g., mechanical assemblies, locking components, machine tool fixtures).
Ensures consistent hardness, surface integrity and testing so fasteners perform predictably in assembly, maintenance and production environments.
Supports procurement specifications, quality control, and conformity assessment for manufacturers and suppliers of metric set screws.

Who uses this standard

Fastener manufacturers and heat-treatment shops
Design and mechanical engineers specifying fasteners
Quality assurance, inspection labs and procurement teams
Metallurgists advising on material and temperature suitability

Related standards

ISO 68-1 (metric thread form), ISO 261 / ISO 262 (diameter/pitch), ISO 965-1 / ISO 965-2 (thread tolerances)
ISO 225 (symbols), ISO 6506 / 6507 / 6508 (hardness tests), ISO 6157-1 (surface discontinuities), ISO 16426 (quality assurance)
Other parts of ISO 898 (Parts 1, 2, 6, 7) for complementary fastener properties

Keywords: EN ISO 898-5:2012, ISO 898-5, set screws, fasteners, hardness classes, metric thread, mechanical properties, hardness testing.

SIST EN ISO 898-5:2012 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Applications

Who uses this standard

Related standards

Похожие стандарты

Abstract

Overview

Key topics and requirements

Applications

Who uses this standard

Related standards

Похожие стандарты

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar thre…

Road vehicles. Collision classification. Terminology

ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Amendment 1

Analysis of natural gas. Biomethane. Determination of terpenes´ content by micro gas chromatography.

Metallic materials — Tensile testing at high strain rates. Elastic-bar-type systems.

ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external…

Dentistry. Multifunction handpieces.

Metallic materials — Brinell hardness test — Part 4: Table of hardness values