Overview
SIST ISO 433:2020 is an international standard that defines the marking requirements for conveyor belts. It specifies the essential indications to be marked on belts, the dimensions of these marks, and their exact positioning. This standard ensures uniformity and clarity in conveyor belt identification worldwide, facilitating better safety, quality assurance, and traceability.
Importantly, SIST ISO 433:2020 applies to most conveyor belts but excludes light conveyor belts as described in ISO 21183-1. This distinction focuses the scope on belts used in heavy-duty and industrial applications.
Key Topics
-
Indications to be marked:
The standard requires certain critical information be displayed, including breaking strength measured in newtons per millimeter according to ISO 283, specific property codes such as flame resistance and electrical conductivity, the year of manufacture, manufacturer identification along with country code, and optional supplementary details like heat resistance or serial numbers.
-
Mark dimensions:
The height of marks ranges from 20 mm to 80 mm. Impression depth varies by cover thickness-up to 1.5 mm for thicker belts or no more than 50% of cover thickness for thinner covers.
-
Mark position:
Marks typically appear on the top cover of the conveyor belt, but in special cases, they may be placed on the bottom cover. Positioning varies based on belt type:
- Full-width belts are marked near the edges (50 mm to 100 mm from either side), with a maximum spacing of 25 meters between marks.
- Slab belts are marked transversely across the width, spaced up to 15 meters apart, with repeated marks across the width to ensure visibility on narrower strips cut from slabs.
-
Optional marking locations:
Markings using paint can be applied to side plates of rolls and mandrels for additional traceability.
Applications
The practical use of SIST ISO 433:2020 primarily supports:
- Conveyor belt manufacturers ensuring consistent, legible, and standardized product markings for global distribution.
- Industrial operators and maintenance teams using markings to identify belt specifications such as strength and flame resistance quickly, improving maintenance decisions and enhancing safety protocols.
- Quality control and compliance auditors verifying that belts meet required standards through traceable marks.
- Custom belt fabricators and suppliers coordinating with clients on marking specifications, including additional custom identifiers like heat resistance codes or serial numbers.
By adhering to this standard, industries such as mining, logistics, manufacturing, and construction benefit from improved operational efficiency and risk management related to conveyor belt inspection and replacement.
Related Standards
SIST ISO 433:2020 is linked closely to these complementary ISO documents:
- ISO 283 - Test methods for tensile strength and elongation of textile conveyor belts.
- ISO 284 - Electrical conductivity and static electricity specifications for conveyor belts.
- ISO 340 - Flammability requirements for conveyor belts.
- ISO 4195 - Heat resistance testing for conveyor belt covers.
- ISO 10247 - Classification of cover characteristics and wear resistance.
- ISO 21183-1 - Defines light conveyor belts, which SIST ISO 433:2020 excludes.
These related standards create a comprehensive framework for conveyor belt characteristics, testing, and safety that complement the marking requirements set out in SIST ISO 433:2020.
Keywords: SIST ISO 433:2020, conveyor belts marking, conveyor belt standards, belt breaking strength, conveyor belt identification, conveyor belt markings, industrial conveyor belts, conveyor belt traceability, conveyor belt safety markings, ISO conveyor belt standards