SIST-TS ISO/TS 22171:2024 PDF

Soil quality - Determination of potential cation exchange capacity (CEC) and exchangeable cations buffered at pH 7, using a molar ammonium acetate solution

Название (английский):

SIST-TS ISO/TS 22171:2024

Soil quality - Determination of potential cation exchange capacity (CEC) and exchangeable cations buffered at pH 7, using a molar ammonium acetate solution

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 13
Дата публикации:: 13 мая 2024 г.
ICS:: 13.080.10
Технический комитет:: KAT - Soil quality

Тип поставки:

Full version195 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:195 €

Описание (английский):

This document specifies a method for the determination of potential cation exchange capacity (CEC) and the content of exchangeable cations (Ca, K, Mg, Na) in soils using a molar ammonium acetate solution buffered at pH 7 as extractant. This document is applicable to all types of air-dry soil samples which have been prepared, for example, according to ISO 11464.

Технические детали

SKU: SIST-TS ISO/TS 22171:2024

Abstract

Overview

ISO/TS 22171:2023 - Soil quality: Determination of potential cation exchange capacity (CEC) and exchangeable cations buffered at pH 7 - specifies a laboratory method to measure potential CEC and exchangeable Ca, K, Mg, Na in soils using a molar ammonium acetate extractant buffered at pH 7. The procedure is applicable to all types of air‑dry soil samples prepared, for example, according to ISO 11464, and combines ammonium saturation, alcohol rinsing, back‑extraction with KCl (or NaCl) and measurement of released NH4+ by continuous flow spectrophotometry. Exchangeable cations can be analysed by AAS or ICP‑AES.

Key topics and requirements

Scope: Potential CEC at a fixed pH (7.00 ± 0.05) and exchangeable base cation content.
Extractant: 1 M ammonium acetate solution buffered to pH 7 (prepared from ammonium acetate or from acetic acid and ammonium hydroxide).
Test portion: Example test portion specified in the method (e.g., 2.500 g soil in percolation device).
Extraction sequence:
- Saturate exchange sites with NH4+ via sequential percolation with the molar NH4OAc (≈80 ml total).
- Collect leachates if measuring exchangeable Ca, Mg, K, Na (analyse by ICP‑AES or AAS).
- Rinse with ethyl alcohol to remove excess NH4OAc, dry, then back‑extract fixed NH4+ with 1 M KCl (or NaCl).
Measurement: Ammoniacal nitrogen quantified by continuous flow spectrophotometry; calibration and reagent preparations (e.g., sodium salicylate, nitroprusside) are defined.
Quality considerations:
- Use water with low conductivity (

Overview

Key topics and requirements

Scope: Potential CEC at a fixed pH (7.00 ± 0.05) and exchangeable base cation content.
Extractant: 1 M ammonium acetate solution buffered to pH 7 (prepared from ammonium acetate or from acetic acid and ammonium hydroxide).
Test portion: Example test portion specified in the method (e.g., 2.500 g soil in percolation device).
Extraction sequence:
- Saturate exchange sites with NH4+ via sequential percolation with the molar NH4OAc (≈80 ml total).
- Collect leachates if measuring exchangeable Ca, Mg, K, Na (analyse by ICP‑AES or AAS).
- Rinse with ethyl alcohol to remove excess NH4OAc, dry, then back‑extract fixed NH4+ with 1 M KCl (or NaCl).
Measurement: Ammoniacal nitrogen quantified by continuous flow spectrophotometry; calibration and reagent preparations (e.g., sodium salicylate, nitroprusside) are defined.
Quality considerations:
- Use water with low conductivity (

SIST-TS ISO/TS 22171:2024 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Похожие стандарты

Abstract

Overview

Key topics and requirements

Похожие стандарты

Soil quality — Determination of potential cation exchange capacity (CEC) and exchangeable cations buffered at…

Soil quality -- Pretreatment of samples for physico-chemical analysis

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

Facility management - Development of the facility management organization (ISO 41002:2026)

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…