SIST ISO 9931:1998 PDF

Coal -- Sampling of pulverized coal conveyed by gases in direct fired coal systems

Название (английский):

SIST ISO 9931:1998

Coal -- Sampling of pulverized coal conveyed by gases in direct fired coal systems

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 18
Дата публикации:: 1 февраля 1998 г.
ICS:: 73.040
Технический комитет:: IRUD - Mining

Тип поставки:

Full version270 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:270 €

Описание (английский):

Specifies a method which, subject to limitations imposed by the geometry of the pulverized-coal pipe, is applicable to multipoint sampling. Annexes A, B and C are for information only.

Технические детали

SKU: SIST ISO 9931:1998

Abstract

Overview - ISO 9931:1991 (Coal pulverized-coal sampling)

ISO 9931:1991 specifies a standardized multipoint sampling method for pulverized coal conveyed by air or other gases in circular pipes of direct-fired coal systems. It defines the mechanical sampler, auxiliary equipment (dustless connection, cyclone, Venturi or ejector), sampling positions and procedures used to derive both the mass distribution of coal to burners and the particle-size distribution for pulverizer performance evaluation. Annexes A–C are informative.

Key topics and technical requirements

Multipoint sampler design: a four-tip rotating sampler that samples 64 equally sized areas of a pipe cross-section (16 angular positions × 4 tips). The sampler head is aligned with the pipe axis and uses exchangeable tips.
Pipe geometry limits: intended for circular pipes with internal diameters typically between 250 mm and 700 mm; sampling is subject to geometric constraints of the pipe and socket.
Particle-size restriction: maximum particle size should be less than one‑third of the sampler tip aperture (document example:

Overview - ISO 9931:1991 (Coal pulverized-coal sampling)

Key topics and technical requirements

Multipoint sampler design: a four-tip rotating sampler that samples 64 equally sized areas of a pipe cross-section (16 angular positions × 4 tips). The sampler head is aligned with the pipe axis and uses exchangeable tips.
Pipe geometry limits: intended for circular pipes with internal diameters typically between 250 mm and 700 mm; sampling is subject to geometric constraints of the pipe and socket.
Particle-size restriction: maximum particle size should be less than one‑third of the sampler tip aperture (document example:

SIST ISO 9931:1998 PDF

Технические детали

Abstract

Overview - ISO 9931:1991 (Coal pulverized-coal sampling)

Key topics and technical requirements

Похожие стандарты

Abstract

Overview - ISO 9931:1991 (Coal pulverized-coal sampling)

Key topics and technical requirements

Похожие стандарты

Coal — Sampling of pulverized coal conveyed by gases in direct fired coal systems

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

Facility management - Development of the facility management organization (ISO 41002:2026)

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…

Anaesthetic and respiratory equipment - Tracheal tubes and connectors - Amendment 1: Reinstatement of third e…